Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS How To

The Web interface

I should also mention that the configuration can also be changed from a web browser. But to do this, you'll still have to initially change the ".ini" file to allow it. Close to the top of the file you'll see a variable called "enableweb". If you set this to "2", you'll be able to re-configure the server using a web interface.

If you want to try this out , change the enableweb and then restart the server as specified previously, except add an ampersand to the command in order to start it in the background, i.e:

./mediaserver&

Next look into the Twonkyvison created ".html" file that's in our Media directory. In this file, you'll find a URL that points to the configuration server. The port in the URL can change from run to run, but mine looked like so:

http://192.168.1.70:9000/configpage/index.htm

Enter the URL into your browser and you should see something like Figure 1. Now you should be able to change most of the settings that appear in the ".ini" file. After you're satisfied with the configuration, enter "fg" from the command prompt to bring the server back into the foreground. Then type <ctrl>c once again to shut it down.

Configuring the Twonkvision server from a web browser

Figure 1: Configuring the Twonkvision server from a web browser

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

For some reason, if I let the router auto-assign 5g channels, most of my clients lose internet access (AC clients). If I lock it on 36, all is fine. I...
RT-AX58U 3.0.0.4.384.8137https://www.asus.com/us/Networking/RT-AX58U/HelpDesk_BIOS/
Hello guys.I am trying to build stable internet for my office but I am little confused.I have like 50 clients(10-15 on each node) in my AIMesh(2x AC-8...
Is it possible to make Transmission (installed in Router) be affected by QoS rules? Because as it stands it looks like it's just bypassing it thus aff...
Hi,I have managed to reproduce a bug that was bugging me for some time now. I kept finding my WiFi down and the router turned off. Well, I believe I f...

Don't Miss These

  • 1
  • 2
  • 3