Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS How To

Introduction

It's been nearly two and a half years since I picked up a Linksys NSLU2 on a whim. I found it to be an interesting little Network Attached Storage (NAS) device that gave me the ability to add much-needed disk space to my network. It worked fine, but since there were additional features I wanted, I decided to dig deeper.

After playing around with it a bit, I found a cgi-bin bug that allowed me to turn on a hidden telnet daemon. Then, after hand-editing the NSLU2's password file on my iBook, I was able to gain command-line access to its underlying Linux operating system where I could begin to really investigate its potential.

While I was exploring the internals of the box, I thought there might be just a handful of other people interested, but I was wrong. It turned out there were a lot of people that thought extending an inexpensive, tiny, silent Linux box was a worthwhile project. When word got out that the NSLU2 was extendable, things really took off. In short order, geeky web sites such as LinuxDevices and Slashdot took notice and a busy developers group was founded. I wrote a number of articles detailing how to extend the capabilities of the box and alternate firmware from the development group were being installed all over the world.

In my earlier articles, I described manually downloading, installing and using a cross- compilation tool-chain, hand-editing source code, unpacking and packing firmware images, etc. In short, modifying the little box was not for the technically challenged or faint-of-heart. The instructions could be cryptic and taking a wrong step could easily destroy the device. But that didn't seem to slow the interest down. The developer's group continued to gain members at a rapid pace, and custom firmware images were being released on a near-weekly basis.

My last couple of articles described a safer way to extend the box using the Unslung custom firmware that provided package management so end-users could painlessly install software packages. Contributors were supplying pre-compiled packages such as an iTunes server (Figure 1), Apache, MySql, etc. for free and easy customization of the box now nicknamed the "Slug".

NSLU2 Itunes

Figure 1: NSLU2 Itunes

My last article on the NSLU2 was back in May of 2005, but since then development has continued at a rapid pace. In this article, I'll check out where things stand today in the NSLU2 community, and look forward a bit to see where the development group is going with this versatile little box.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have an Ax88U and I am moving into a appartment that only has wireless internet with a password.How would I connect my Ax88U to their WiFi and share...
Will Diversion work on guest networks? I have created segregated Lans using YazFi. I have Rokus on its own network for privacy, but would like to use ...
For a few firmware version now. I noticed that my Guest WiFi would just completely drop out. As in going into CLI and looking at the interface, it co...
With asuswrt-merlin.ng version 384.10_2:If the nat hardware acceleration turns on and IPv6 is set to Passthough, the system log was flood with :"kerne...
2 68Us running mesh at firmware _45713 (problem also at previous version)iPads & iPhones at IOS 12.2ASUS IOS Router app 1.0.0.1.49 (most current) All ...

Don't Miss These

  • 1
  • 2
  • 3