Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS How To

6- Mount the RAID device

With the mount directory created, you use the Disk and Network Filesystems module to mount the RAID array to it. Figure 11 shows the correct dropdown selection and Figure 12 the window that results.

Creating an ext3 mount

Figure 11: Creating an ext3 mount

The changes on this page are circled in red. Mounted As points to the mount directory, RAID Device is set to the created RAID array and Allow Users to Mount this Filesystem is selected.

Linux Native Filesystem (ext3) Mount Details

Figure 12: Linux Native Filesystem (ext3) Mount Details

If you have set everything correctly, you won't get an error when you click the create button and will be rewarded with a screen that looks like Figure 13.

RAID array successfully created and mounted

Figure 13: RAID array successfully created and mounted

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

...

Over In The Forums

Based on the RT-AX55, are there any sub-200.00 routers that have better ranges, in the AX class? I have to set up a network for my dad, who is long di...
I am trying to setup an ASUS DSL-AC68U router just as an access point behind my main isp router using PIA Open VPN. I know this is not the best soluti...
FlexQoS Version 1.1.0 - Released 13-Dec-2020 NEW:Replaced total data transferred pie charts and Bandwidth Util bars with running rate line charts. Av...
I have wanted Netgear to give us simple bandwidth monitoring. My need is pretty basic, I’d like to know how much bandwidth each device is using. My ne...
Hi all,Using Voxel's firmware on the R9000, since V1.0.4.47 and the last before (I think, could be a bit longer) updates, I've run into an issue with ...

Don't Miss These

  • 1
  • 2
  • 3