Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

All products feature gigabit Ethernet (10/100/1000 Mbps) LAN connection, come with four hot-swappable SATA-II drives that can be configured for RAID 0, 1 or 5 and include five client licenses for EMC Retrospect Express backup software. The StorCenter Pro NAS 200r also comes with CA eTrust Antivirus version 7.1 software pre-installed and CA BrightStor ARCserve OEM edition with Disaster Recovery, version 11.5.

The StorCenter Pro NAS 150d 3TB Server is available now at an MSRP of $1,699.00. The StorCenter Pro NAS 200r 1TB Server and Pro NAS 200r 1TB Server with Print will be available later this month at MSRP's of $1,899.00 and $2,499.00 respectively.

More NAS

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

As I understand, a wireless repeater will cut bandwidth in half (loosely speaking). Also, connecting a second AP to a router will not affect bandwidth...
HiI need a new wireless access point that I can connect to my ubnt edgerouter x. I was considering unifi nanoHD but I really don't want to mess with t...
I am in need of a couple of Wi-fi Bridges to link a smartTV and a small home office network located on opposite sides of the ground floor with my wire...
Sorry for the noob question - but I have added a cron job that I would like to survive scheduled reboots. What file to I need to edit (and what should...
i know 802.3af standard is limited to 100m. i would like to install an access point 800' away from my switch. POE extenders are an option, but does an...

Don't Miss These

  • 1
  • 2
  • 3