Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

The DS209+ has an 800 MHz CPU and 512 MB of RAM vs. a 500 MHz processor and 128 MB of RAM in its DS207+.

Both products also have 3 USB 2.0 ports and 1 eSATA port. Synology specs the new NAS at 42+MB/s for read and 36+MB/s for writes for Windows file copies (XP2, RAID 1, gigabit LAN with 9K jumbo frames).

The new NAS runs Synology's Disk Station Manager 2.0 with a feature set that includes scheduled local and network backup, UPnP AV and iTunes media servers, AD/NT domain support and SMB/CIFS, NFS and AFP network filesystems.

The DS209+ will be available in December. Pricing will be announced next month.

More NAS

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Is it possible to control LAN access via iptables? I have a bunch of IOT devices that I want to access the internet and (and this is the kicker) accep...
I recently enabled the statistics for traffic analyzer, and in the list of clients I was seeing this mac address I couldn't find on my network , I fou...
just a quick question, I have an rt-ac56u with 378.55 firmware on it, is it possible to update from 378.55 to 384.5 or is this too much of a jump??
HelloSorry if this is a repost of the same topic somewhere else.Im having issues when looking for devices at the traffic analizer page. I can see all ...
Hi all I have to put a new iptable rule. For that I have created a script and named it "firewall-start" and located it under /jffs/scripts/If I run th...

Don't Miss These

  • 1
  • 2
  • 3