Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

The Rack Station RS409 is a lower-cost, lower performance version of Synology's RS409+ that was announced in March. The hardware platform includes a 1.2 GHz Marvell Kirkwood processor, 256 MB of DDRII RAM, two Gigabit LAN ports, two USB2.0 ports and one eSATA port.

Four hot-swappable 3.5" SATA drive bays accept up to 2 TB drives for a total capacity of 8 TB that can be configured as single drives, in JBOD or RAID 0, 1, 5, 5+Spare or 6. An optional RX4 expansion chassis connects via an eSATA cable to increase total storage to 16 TB (two volumes of 8 TB).

The RS409 runs Synology's Disk Station Manager 2.1 OS with a feature set that includes CIFS, AFP and NFS network filesystems, AD / NT domain support, FTP, secure FTP and HTTPs, LAMP webserving, iTunes and UPnP AV / DLNA media serving, photo sharing and more.

Synology said the RS409 is shipping now with street pricing around $750.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hey everyone, super excited to find this forum. I have some questions about setting up my home's internet network and not a lot of solid knowledge abo...
Been back and forth with Ring support they keep blaming the ac66u b1 router I'm using. I kept blaming the android app cause it worked fine on my pc, b...
I get 'Illegal instruction' when running any Entware app/command.Trying to run the setup script generates the same error.The problem appeared suddenly...
yesterday there was a major internet down. Today I’m back up and running, after the isp fixed the issue. On my end thou, power cycling the cable model...
I realise this would probably be far more trouble than it's worth, but if you never ask, you never get. I find the kill-switch function on VPN clients...

Don't Miss These

  • 1
  • 2
  • 3