Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

Synology DS1010+ Updated SmallNetBuilder has learned of another new Intel-based NAS coming from Synology.

The preliminary specs we've found for the DS710+ two-bay NAS show an "Intel 1.6 GHz" CPU, 512 MB of DDR800 RAM, single Gigabit Ethernet LAN, three USB 2.0, one eSATA and serial console VGA ports. Either 2.5" or 3.5" SATA drives can be used.

Synology DS710+ NAS

The spec also indicates that the 710+ can be expanded with the DX510 expansion chassis, same as the soon-to-be-available DS1010+.

Amazon's product page indicates "110+ MB/Sec Reading, 93+MB/Sec Writing" performance and support for Basic (individual drives), JBOD, RAID 0/1 volumes. Provantage and NCIX product pages have similar info. NCIX's page indicates a February 20 arrival date for stock. Pricing ranges from $514 to $572.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Previously was using Merlin on my R7000 and I made a post about the WAN MAC Addres showing an old MAC Address from my previous ONT.... Now I am runnin...
I just installed merlin on my AC88U and i see all these settings in fq_codel area but when ever i select anything it doesn't change and am i supposed ...
Dears,From time to time my Asus RT-AC88U with Asuswrt-Merlin 384.8_2 firmware stops loading images and videos from Facebook. Sometimes is Whatsapp ima...
Hey all,I've been using a 3 router AiMesh (AC66u B1, AC5300, GT5300) setup for awhile. They are all connected via Ethernet. I did a firmware (3.0.0.4....
I tried to set it up, but I am failing - not for the first time. This time, I have a very basic scenario, one PC is solely a torrent box atm, so I wou...

Don't Miss These

  • 1
  • 2
  • 3