Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

Buffalo TeraStation ES Updated 1/26/2010   Buffalo Technology today announced a new four-drive RAID 5 NAS.

The TeraStation ES is intended to fill a gap between Buffalo's TeraStation Pro II and TeraStation III. It uses a 1.2 GHz Marvell Kirkwood CPU and 256 MB of RAM vs. a Marvell MV78100-A0 C080 and 512 MB of RAM on the TS III and a Marvell "Orion" 88F5281 and 128 MB of memory on the TS Pro II.

Features include support for 0, 1, 5, 10, JBOD volumes with optional 128-bit AES encryption, Active Directory integration, real-time share replication, hot swap / spare drives and dual Gigabit Ethernet LAN ports.

Buffalo says the ES will be shipping shortly with estimated street prices of $699.99 for the 2TB (TS-XE2.0TL/R5), $899.99 for the 4TB (TS-XE4.0TL/R5), $1299.99 for the 6TB (TS-XE6.0TL/R5) and $1699.99 for the 8TB (TS-XE8.0TL/R5).

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

It looks that while Samba in Merlin shares main admin login and password, the number of SMB connections is limited to 1, regardless of configured in c...
Hello Snb community !I am new to Routers, Assus and Merlin, If i may I have a question for the community.I understand how to locate and Install softwa...
Of course you can open the WebUI to get your public ip address, but how about getting it programmatical?Actually, it's simple, just add this line to '...
Hello. I use Merlin 384.13. Is there a way to enter a system command? I understand Merlin is not WRT however to clarify what I am talking about on WRT...
Hi all,I just moved into a new 2-story house with pre-existing coaxial wiring, but its not wired with CAT5 like my old place. My current setup is:Arr...

Don't Miss These

  • 1
  • 2
  • 3