Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

DroboPro FSData Robotics has announced a networked version of its DroboPro attached storage appliance.

The DroboPro FS is an 8 bay version of the Drobo FS that was introduced in April. It uses Data Robotics' BeyondRAID technology that allows for easy storage expansion, has the ability to incorporate different-capacity drives into a storage volume and protects against failure of up to two drives. The Pro FS also employs "self healing" technology that continuously examines data blocks and sectors on each drive to flag potential issues.

The Pro FS has dual Gigabit Ethernet ports with failover capability, eight bays for 3.5" SATA drives, but no eSATA or USB ports for external drive support. AFP and CIFS/SMB network file systems are supported, but not NFS.

DroboPro FS is shipping now for $1,999 MSRP with no drives up to to $3,299 MSRP for a 16TB bundle.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Good Day,I am in canada, and have a VPN setup to route traffic through for certain devices but netflix wont let me watch when connected.I would like t...
Hi there,I tried to update my ac58u's firmware yesterday, and after the update, all indicators stop lighting except the power one.I then tried to use ...
I have just been swapped over to Australian nbn with TPG my problem is the modem and router are separate unlike the Optus modem router I had I want to...
I figured this would help consolidate the issues into one thread to help others as well as @Jack Yaz look at one thread instead of multiple ones. This...
Hi everybody. I am currently running Merlin 380.70 on my RT-AC66U, and I know it's obsolete now. I need to either go back to Asus firmware or John's f...

Don't Miss These

  • 1
  • 2
  • 3