Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

QNAP logoQNAP has announced support for 3 TB drives for many of its NASes.

The company said that Hitachi (Deskstar7K3000 HDS723030ALA640) and Seagate (Barracuda XT ST33000651AS) 3 TB hard drives are "fully supported" via upgrade to V3.4.0 firmware.

Models that can now accept 3 TB drives include Intel Atom based TS-x59 Pro+ and TS-x39 Pro II + models and the Marvell-based TS-x19P+ series.

Check QNAP's announcement for a full list of models supporting 3 TB drives.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi SNBI have just set up my new ax-86u router. My syslog is full of the message kernel: invalid dirty_p detected with various codes following.I can't ...
Hmmmmmrunning 384.19 on an rt-ac86u in access point mode. And I looked at the wireless logs.the log says the device is offline. But it’s not. WemoBack...
NOTE: ntpmerlin users using chrony need to toggle to ntpd and back to chrony after updating entware
I set up a new VPN Client.DNS Global Filter is set to ON > RouterDNS is set to use the recommended NordVPN IP addresses.Everything works as expected s...
Do both firmwares have the same OpenVPN version? Where can I see which version they have?Thanks.

Don't Miss These

  • 1
  • 2
  • 3