Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS Reviews

Performance - Read

Read performance is generally more indicative of real (as opposed to cached) performance. So here are the IOzone 3D plots for the Giga, 10/100 LinkStation and TeraStation with a 100 Mbps LAN connection. You can see that there's not much difference in peak read performance. Note that the drops down to zero toward the front left of the plots in Figures 13 and 14 are due to different IOzone settings that omitted testing those file and record size combinations.

Giga LinkStation Read performance - 100 Mbps LAN

Figure 12: Giga LinkStation Read performance - 100 Mbps LAN
(click image to enlarge)

LinkStation Read performance
Figure 13: LinkStation Read performance
(click image to enlarge)

TeraStation Read performance - 100Mbps Span mode (default)
Figure 14: TeraStation Read performance - 100 Mbps Span mode (default)
(click image to enlarge)

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi everyone, this is my first post ever here. Hope the answers will be helpful to other users, too …I'm trying to connect two RT-N14UHP routers with t...
HiRT-AC87U, Firmware Version 384.9Router 1, VPNRouter 2, Non VPNThe both routers do have VPN servers setup in them, but mostly Router 2 is used with p...
Hi,Is this possible?I wanna plug second router to first (1lan port) second router (wan port)Set vpn on first router for mac address of second router, ...
Hello all!I was planning to use my RT-AC56U as a serial debug bridge for an Odroid board which is close by. I hooked up a USB cp210x adapter into its ...
I was a little surprised that my router doesn't come with some kind of throughput measurement tool. I figured I could mount a disk on the router and m...

Don't Miss These

  • 1
  • 2
  • 3