Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS Reviews

Feature Tour

To dig deeper, I selected the "Enter device settings" which spawned my browser and connected to a web server running on the box. Figure 4 shows the initial configuration menu that is displayed after the administrator logs in.

Main Menu

Figure 4: Main Menu

Note that the 150d only supports HTTP, not the more secure HTTPS connections. In the Summary display, you can see that my one terabyte capacity has been reduced to 686 GB due to the default RAID 5 setup of the device.

Under the System Task area you can see several options such as restart, logout, etc. which are pretty clear, but I wasn't sure what the "Identify" button was used for until I checked the documentation. When this button is selected, an LED on the front of the box will blink. So if you're not sure which of your several 150ds you've logged in to, hit the button and it will be obvious. Clever.

Under the Basic menu (Figure 5), options were available for several standard configuration items, such as machine name, administrator password, language, time, etc.

Basic Menu

Figure 5: Basics Menu

The 150d supports setting the time via the Network Time Protocol (NTP), but there is no way to specify which NTP server to use. Hopefully Iomega implemented the NTP protocol properly, because as others have found out, hard-coding an NTP server is generally a bad idea and can lead to unexpected problems. An "Alerts" menu lets you set up an email address for problem reporting. Figure 6 shows the "Alerts" configuration.

Alert Setup

Figure 6: Alert Setup

I set up the system with my information, and was able to get a test message, but during this review, the only other alerts I received were related to RAID testing I describe later. Note the absence of any way to specify a username/password for the outbound SMTP connection, so if your ISP requires logging in before sending email, you'll have to make other arrangements.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I'm looking at buying a couple of new Asus AX routers. I was thinking on spending the extra money for the ROG Rapture GT-AX11000 but I see an awful lo...
The past few days the CPU temp is sitting ~80*C for no reason. The CPU load reports to be less than 10%, the only thing I can think of is that maybe t...
i have problem updating latest firmware Version 3.0.0.4.384.6287. Currently i have 6204 installed. i checked for new firmware and node has been update...
So today I noticed the LED's are all off. But the router still works perfectly. Did the LED'S just go out? Is there a fix for this?
Hi, just got a rapture AX11000 . Work mostly well with the exception on the connection to playfi speakers / harmony / hue. After a few minutes the rou...

Don't Miss These

  • 1
  • 2
  • 3