Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS Reviews

Introduction

Thecus N5200

At a Glance
Product Thecus High Performance NAS Server (N5200 Pro)
Summary Five bay multi Terabyte-capacity BYOD NAS with RAID 0, 1, 5, 6, 10 and JBOD support
Pros • Very high performance
• Hot-swappable drives
• NFS, AFP, iSCSI support
Cons • Noisy
• User Interface still unsophisticated

Thecus' N5200 has sat at or near the top of our NAS Charts for almost two years. Its design, based on a 600 MHz Celeron M with 256 MB of RAM, has managed to fend off challenger after challenger. But now comes the 5200 Pro, which Thecus is aiming at "Enterprise" users while positioning the 5200 for SMB/SME buyers. So when Thecus asked me to run the new model through our tests and add it to the Charts, I, of course, agreed.

The Pro turns out to be essentially the same beast as the 5200, but with a Low Voltage Intel Celeron M clocked at 1.5 GHz and memory increased to 512 MB. But I found that, at least for my testing, the faster CPU and increased memory didn't make much of a difference in performance.

The original review also describes the Pro pretty well, so I will cover only the differences that I found in my brief time with the product. Note that I did not recheck each feature, so that it's possible that some of the bugs that I reported in the original review has been fixed in the current 2.00.10 firmware.

The Pro's physical design is unchanged from the original. Figures 1 and 2 provide a summary of the controls and ports.

Front panel

Figure 1: Front Panel

Everything is pretty much the same including the eSATA port and type B USB 2.0 port (callout 3) that lets the Pro serve as (big) external USB drive attached to a Windows PC or support a USB wireless LAN adapter using the relatively uncommon ZyDAS ZD1211 or ZD1211B chipset. (The Zyxel ZyAIR G-220 V2 will probably be the easiest to find.)

Back panel

Figure 2: Back Panel

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Set up my AC68U to utilize NordVPN servers...I'm sorry guys, but I've been searching for too long and the search terms are just too generalized to get...
If want to turn off LEDs at midnight, do I enter 23 or 0 as an hour ?How about to be more precise, and enter minutes into LED scheduling scripts ?cr...
Just curious, where does the router store things like traffic statistics and log data? Also how much space does it actually have? Is there an easy way...
He’llo,I am no stranger when it comes to networking or setting up a new network. But even this AIMesh has got me frustrated to the point of screaming ...
Hi all, and thank you in advance.would someone be able to explain this system log for me? (after reboot)RT-AC86U and RT-AC68U running AiMeshMay 5 15:0...

Don't Miss These

  • 1
  • 2
  • 3