Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

CES 2011

CES LogoActiontec announced a "multi-room" wireless HDMI adapter kit.

Its MyWirelessTV is said to "operat[e] on the WiFi standard" and are powered by WiVu technology from Cavium Networks, using the company's PureVu video processors. It uses advanced video Quality of Service (QoS), dynamic rate adaptation, error resiliency and concealment technology, and dynamic bit-rate management to work its HD streaming magic.

Actiontec MyWirelessTV

MyWirelessTV supports H.264, HDMI 1.4 with HDCP 2.0 encryption, and is 802.11 compliant. Actiontec's release doesn't say which frequency band it uses, however. You simply connect the pair to HD source and display via HDMI cables, plug them in and go.

MyWirelessTV will start shipping in Q2 and will be priced at $199. Individual MyWirelessTV receivers will be available at a later date. Unlike many other of Actiontec's products that are for service providers only, you'll be able to buy this one.

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have a pfSense box and need an 8-16 port managed switch to configure VLANS on both a wired network and a wireless AP. I would strongly prefer a POE ...
I need to move over 100k files from each of several directories. Select-all + drag-and-drop sometimes fails. I'd prefer to set a task, but for some re...
Hello all, I recently picked up 2x TP-LINK EAP225_V3 access points, and 1x EAP225_Outdoor. Current idea is to disable wireless on my trusty old N66U r...
Tim joined this forum on May 18th 2008. I assume that means that the forums were setup ten years ago (unless he was on a different platform before tha...
I have a new (less than 1 week old) AC86U and am running 384.5 on it.Fairly plain vanilla config with the exception of adding several static IPs to DH...

Don't Miss These

  • 1
  • 2
  • 3