Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

CES 2014

CES 2014 logoAmped Wireless revealed two AC1900 products today to beat the CES 2014 rush.

The RTA30 High Power AC1900 Wi-Fi Router is a 4x4 802.11ac router with Amped's signature collection of separate 2.4 and 5 GHz radios and amplifiers behind each radio. In this case, the totals are eight radios and 16 power amps.

Amped apparently decided to make do with only four dual-band antennas, though. But wouldn't eight single-band antennas really have sealed the Wi-Fi parts-count bragging rights deal?

Other ports include one USB 3.0 port for storage sharing and Gigabit WAN (1) and switched LAN (4) ports. The router will come with all Amped's usual features that include guest networks, adjustable coverage controls and parental controls.

Amped Wireless RTA30 High Power AC1900 Wi-Fi Router

Amped Wireless RTA30 High Power AC1900 Wi-Fi Router

In case the RTA30 doesn't go far enough for you, Amped also announced the REA33 High Power AC1900 Wi-Fi Range Extender. It looks just like the RTA30, only white. From its brief description in the press release, it looks pretty much like the RTA30's hardware in a white case and with different firmware. Since its ports are active, you should be able to use it as an AC1900 bridge, too.

You won't be able to get your hands on all this AC1900 Wi-Fi machismo until "mid-2014", however. Amped didn't say how much these bad boys would cost then, either.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi There,Update 2020/08/06386 rc2-3 firmware is in this linkhttps://drive.google.com/drive/folders/154vHdrYh_rGP_qFooHgAkzXSJchge7Ue?usp=sharingChange...
I plan to make available a beta version of the next kamoj add-on - if there is enough interest.N.B: Voxel firmware is a pre-requisite, not an option!I...
I was doing some research and was seeing a lot about issues with the 2.4ghz band not working after a while or having very short range (or poor perform...
No matter what I put for upload/download bandwidth on a new RT-AX88U on Merlin 384.18, it will peg the upload speed at my ISP's maximum speed and ping...
Hi to all!I just installed Pyload and Transmission on my RT-AC86U. Now I have a problem. I have to set the router (192.168.1.1) to go to Internet thro...

Don't Miss These

  • 1
  • 2
  • 3