Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

CES 2016 logoAmped Wireless launched an inexpensive MU-MIMO AC1300 class product line and wall-plugged extender at CES 2016 today.

The ARTEMIS Router, Range Extender and Access Point are all based on an AC1300 class, MU-MIMO enabled chassis supporting maximum 3x3 link rates of 450 Mbps in 2.4 GHz and 2x2 link rates of 867 Mbps in 5 GHz. These are the first 2x2 MU-MIMO enabled router / APs available.

All three ARTEMIS devices have 5 Gigabit ports and a USB 3.0 port for file sharing. Amped says three simultaneous MU-MIMO devices are supported.

The ARTEMIS, ARTEMIS-EX and ARTEMIS-AP all list for $129.99 and will be available in April.

Amped Wireless ARTEMIS Router

Amped Wireless ARTEMIS Router

The REC22P Wi-Fi Range Extender is an AC1200 class wall-plugged format wireless range extender with pass-through AC outlet and front-panel USB power port. Other features include "BoostBand" Technology to select the best connection back to the base router and signal strength LED for easy setup.

The REC22P lists for $99.99 and will be available for order in late February.

Amped Wireless REC22P Wi-Fi Range Extender

Amped Wireless REC22P Wi-Fi Range Extender
Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,Before I had one time where after a power outage config. reset to factory defaults... (just flashed config. and solved it)But this time was differe...
Hello,I've been using asuswrt-merlin firmware for quite some time in my AC87U router. I was running version 384.9 since today when I decided to upgrad...
This is a bit of a long and complicated problem, and it is in two parts... so please bear with me.I have the following equipment.A Plusnet one hub (I ...
I am having a problem loading Merlin on my RT 86u.the stock version does not allow me to select the merlin software on my PC , it only has the firmwar...
I would like to be able to tie OPENVPN to a specific SSID or LAN port, e.g I want default traffic go out on the Internet, but specific devices to use ...

Don't Miss These

  • 1
  • 2
  • 3