Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

The DCS-910 has an Ethernet only network connection (10/100), while the DCS-920 has both Ethernet and 802.11b/g wireless network connection options.

The cameras can also be configured to detect motion, send email alerts when motion is triggered and record to a computer on the home network or attached storage devices for detailed video monitoring and playback.

MJPEG video and JPEG still image formats are supported with resolutions of up to 10fps at 160x120, up to 15fps at 640x480 and up to 30fps at 320x240. Both cameras have a fixed focus 4.57mm, F1.9 lens and VGA 1/4" CMOS sensor with 1.0 Lux sensitivity. The DCS-920 supports WEP, WPA and WPA2 wireless security.

D-ViewCam2.0 software is included with both cameras to enable the simultaneous viewing of up to 32 cameras with a wide range of remote control features from a computer running Windows XP or Vista

The cameras are available now at MSRP's of $99.99 and $119.99 for the DCS-910 and 920 respectively.

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Is it possible to control LAN access via iptables? I have a bunch of IOT devices that I want to access the internet and (and this is the kicker) accep...
I have a pfSense box and need an 8-16 port managed switch to configure VLANS on both a wired network and a wireless AP. I would strongly prefer a POE ...
I recently enabled the statistics for traffic analyzer, and in the list of clients I was seeing this mac address I couldn't find on my network , I fou...
just a quick question, I have an rt-ac56u with 378.55 firmware on it, is it possible to update from 378.55 to 384.5 or is this too much of a jump??
HelloSorry if this is a repost of the same topic somewhere else.Im having issues when looking for devices at the traffic analizer page. I can see all ...

Don't Miss These

  • 1
  • 2
  • 3