Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Axis logoAxis has added two new models to its "most affordable" IP camera line.

The AXIS M1014 supports HDTV 720p /1 megapixel resolution, while the AXIS M1013 offers SVGA resolution. Other features include motion detection, tamper alarms, H.264 compression and internal micro SDHC card slots. Both cameras can also record to network shares.

Management is via built-in web interfaces and AXIS' Camera Companion or Camera Station multi-camera management systems.

Axis M1013/M1014 IP camera

Both cameras are expected to start shipping sometime this quarter at MSRPs of $179 for AXIS M1013 and $229 for AXIS M1014.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

My GT-AC5300 is only getting between 50mbps and 150mbps. I have a gigabit connection. From the modem directly, I get 900mbps. I've changed cables and ...
Hi folks, Wondering if you're able to help. Recently upgraded from the ISP-provided router for our gigabit fibre to the Asus RT-AC86U. With the defaul...
So, this is a thing that has bugged me for a long time. When I am on the Network Map page, I see the clients connected with 31 connected clients. Then...
I ran into this issue early today and figure to upgrade the firmware to 384.8_2 since it is available (hoping that fixes the issue)...But I still can ...
Hi..This is related to Asus RT-AC88U firmware version 384.8_2 but I always get "Cannot assign requested address" and "Failed to get IP for interface e...

Don't Miss These

  • 1
  • 2
  • 3