Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Installation and Configuration

The 211A runs an embedded web server and in order to access this server, you must assign an IP address to the network camera. There are six ways to do this:

  1. Axis IP Utility
  2. UPnP
  3. ARP/Ping
  4. Axis Dynamic DNS Service
  5. DHCP
  6. Static IP

Axis recommends using its IP Utility to configure the IP address of the 211A. This is done by connecting the Axis 211A to your network and popping the installation CD into any computer running Windows 2000 / XP. The IP Utility will automatically run and find all the Axis cameras on your network.

IP Utility automatically finds all Axis cameras on the network

Figure 4: IP Utility automatically finds all Axis cameras on the network

Right-clicking on a camera (Figure 4) will allow you to set its IP address and view its built-in Home Page. You can verify that you are configuring the correct camera by matching up the serial number reported by the utility (Figure 5) with the number on the underside of the camera.

Setting the IP Address

Figure 5: Setting the IP Address

Success!

Figure 6: Success!

Users of operating systems other than Windows will have to use the other four methods of setting the IP address. Note that DHCP is enabled by default and the camera will default to 192.168.0.90 if it doesn't find a DHCP server.

Axis Dynamic DNS Service

If you're going to make the 211A accessible from the Internet, you'll probably be interested in Axis' Internet Dynamic DNS Service. This is a FREE service that allows you to assign a fixed domain-based address to your Axis network camera that can track the changing IP addresses used by most ISPs.

You configure the service by connecting the 211A to your network, and pressing the control button on the underside of the camera once. The Status Indicator will turn green while it connects to the Internet and talks to the Axis Internet Dynamic DNS Service. You then surf to the Axiscam.net webpage and type in the serial number on the underside of the camera to complete registration.

Tip Tip: This service will not work if your Internet connection runs through an HTTP Proxy. You'll also need to open the port used by the camera (default is 80) on your router's firewall.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi everyone,I have been trying to set things up (as per the attached LL design), but I was wondering if anybody can help maybe and stop me if I'm head...
Hello everyone,I have posted my problems with a QNAP TS-212P and duplicate files and directories/files being renamed :https://www.snbforums.com/thread...
Just curious as to why the vertical axis on the 24-hour traffic analyser is not set to display the data better...View attachment 20951
So here goes a long one. I’m only posting this to let people know the progress I’m on for my @lifx bulbs.the problem... opening the app and lost contr...
since going to 384.14_2 I lose wireless sometimes and have to reboot the router. always comes back after reboot. wired connections fine. this is the f...

Don't Miss These

  • 1
  • 2
  • 3