Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Setup - more

Like most PCs out there, mine is not Viiv certified, so I went with the standard install. The installation went smoothly, but I was a bit annoyed to have to reboot when the install was complete. When the reboot finished, I entered the media server configuration menu to choose which directories I wanted to serve up to the LinkTheater (Figure 4).

Server configuration

Figure 4: Server configuration

The basic idea is that you pick out the directories that include your multimedia, and the server will index them for serving up to the LinkTheater. I found that this indexing could take quite a while, depending on how many files you have. Once I had this running, I turned back to the LinkTheater for playback. Figure 5 shows the top-level menu.

Top-level menu

Figure 5: LinkTheater top-level menu

As you can see, the basic menu is fairly spartan with little visual appeal, sort of reminding me of the Windows 3.0 days. Under the "Browse Media" sub menu you'll find a selection of all of the media servers present on your network (Figure 6).

Server Selection

Figure 6: Server Selection

In my case, I had quite a few to choose from. For some reason, the LinkTheater install loaded two different servers, the "Buffalo Media Server" and the "Mediabolic Media Server." I was already running Windows Media Connect, which is a standard Windows UPnP AV server compatible with the LinkTheater. I also had several more UPnP AV servers running on NAS devices on my LAN that I could use. I checked out the various servers and for the most part, the LinkTheater responded the same with all of them. Figure 7 shows the options once a server is selected.

Media Server Main Menu

Figure 7: Media Server Main Menu

The top-level menu will vary a little depending on the server you're talking to, but in all cases, the menu is very basic.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Dear FriendsI am happy owner of ASUS RT-AC86U and I have installed Asuswrt-Merlin firmware 384.9. I would like to ask you some questions:1. I use DDNS...
I use an Asus RT-AC86U and have a VPN configured with kill switch enabled. A few weeks ago, the VPN server the router was connected to had connectivit...
I recently bought a Linksys XAC1900 to be configured in bridge-mode and used as an access point hooked up to my switch. So far so good and works flawl...
HiI have currently a RT-AC87U and a RT-AC66U, where the latter is a accesspoint connected through wire to the main router. I use PIA VPN and want more...
Hi, I am new to Merlin firmware. Used to have RT-N16 on Asus firmware which was working pretty well for almost 10 years. Now, with new AC88U flashed w...

Don't Miss These

  • 1
  • 2
  • 3