Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Hands On

If you are familiar with the Harmony user interface, you'll feel right at home accessing your SmartThings devices. Like all configured devices, SmartThings devices authorized for your device appear in the right-hand column. In the composite image below, the left screenshot shows the installed SmartThings devices in the right column highlighted in red.

Each device appears in an appropriate category. All three lights appear in the Lights category shown in the right-hand image. The category icon shows how many lights are on - a nice feature in the collapsed view.

Here, I've clicked on the right arrow next to WeMo Bulb to show detail for the device. Tapping on the icon toggles it on or off. From the center screen, you can also turn the device on or off as well as control brightness. If you click "Apply to all in lights", that brightness level will be set for all devices in the lights category.

Harmony - SmartThings devices (left) and device control (right)

Harmony - SmartThings devices (left) and device control (right)

As with entertainment devices, you can also create activities for your SmartThings devices. In the composite screenshot below, you can see I've created an activity to "Turn on all lights at 50%". The left screen shows the activity and the right shows the Light group expanded and that all three bulbs are on.

Harmony - SmartThings activities (left) and device status (right)

Harmony - SmartThings activities (left) and device status (right)

You can run this activity manually by tapping on the activity or you can schedule it. However, scheduling is fairly basic. You can set the start time and end time and select the days of the week that the activity will run. In the screenshots, you can see I have created a schedule to run the "Turn on all lights at 50%" activity at 8:00 AM in the morning and 5:00 PM in the evening on weekdays.

Harmony - SmartThings - Activity summary (left) and set start time (right)

Harmony - SmartThings - Activity summary (left) and set start time (right)

You can also use sunrise or sunset for start or end times (right screenshot). You can create only one schedule for each activity. In my tests, I tested running the activity both with the Harmony app open on my iPad as well as with the app closed. In both cases, the schedule executed as scheduled and the lights turned on and off at the correct times.

Even though the user interface allows using the motion sensor as a trigger, I was unable to get it to work. Rather than using the schedule I created above, I configured the motion sensor to run the "turn on all lights at 50%" activity if motion was detected and to turn off all lights after one minute of no motion detected. Though I confirmed through the SmartThings app on my Nexus 7 that the motion detector was being tripped, the activity didn't run.

Since the SmartThings-connected devices are part of the Harmony infrastructure, you can include devices as part of your Home Automation activities. You can turn on one or more lights at a specified brightness when a specific activity runs and change the lighting level when you stop an activity.

For example, on a "Watch TV" activity that turns on the TV, sets the HDMI port and turns on a cable box, you could also turn on your living room lights and dim them to 20%. When you stop your Watch TV activity, you could either turn off the light or reset them to a brighter level.

After linking to SmartThings, I edited my own "Watch TV" activity shown in the screenshots below to control my three smart bulbs. You can individually control the on sequence (left) and off sequence (right) for each device configured for an activity. I tested the integration of the SmartThings LEDs with the Watch TV activity and the lights came on at the correct levels when I turned on my entertainment system and went off when I shut down the system for the evening.

Harmony - SmartThings devices integrated into a home entertainment system activity

Harmony - SmartThings devices integrated into a home entertainment system activity

Closing Thoughts

The Logitech Harmony firmware upgrade is easy to accomplish and adding SmartThings-controlled devices to your Harmony environment is as simple as adding any other device. If Logitech adds more supported SmartThings devices (or any other supported system), all you'll have to do is refresh your link and login again to authorize them.

The actual apps running on your iOS and Android devices aren't upgraded. SmartThings just appears as an additional device, so the Harmony apps on both iOS and Android platforms work the same way, and as well, as they did in the past.

It's nice to be able to perform simple on/off/dimming features through the Harmony interface - it could eliminate one additional program/UI you use daily. But for more complete control, you'll need to use your devices' native app. Still, if you happen to be at the intersection of those who own a Harmony Home and SmartThings Hubs, Logitech's new firmware is worth checking out.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi guys,i have Ax86u router working absolute fine. I am planning to extend the signal to the back garden. Can someone suggest a cheap either an access...
Hi guys, please to point me in the right direction if I missed something, but amidst all the "devices losing connection to router" and "router losing ...
Hi all... I have a stock 88U running in wireless router mode, latest asus firmware. I've noticed when I add static IPs and apply, I get logged out at ...
I'm currently using an AC68U as my primary router with several media bridges (AC66U, AC56R, Buffalo H1300) around the house connecting via AC wireless...
Hi, can anyone advise me where I can purchase an Asus RP-AX56 WiFi 6 repeater from?It's on the Asus website: RP-AX56 FAQ | Networking | ASUS GlobalAS...

Don't Miss These

  • 1
  • 2
  • 3