Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

Devicescape launches new service, software, to reduce friction: The company opened its public beta to enable portable Wi-Fi-equipped devices to attach themselves to hotspots without the tedium--when it's even possible--of logging in.

Devicescape, until now, has been known as an embedded Wi-Fi driver developer, making network software that runs on devices that have very little space and very little battery power to carry out that task. They're leveraging their knowledge and experience in launching this new service.

Full Story on Wi-Fi Networking News

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Asuswrt-Merlin 384.19 beta is now available (except for the RT-AX56U which won't be available for this release, due to outdated GPL code).The main cha...
I have 384.18 currently but this was on the last build as well. My system log shows these entries multiple times and several times a day:"dnsmasq[437]...
Is there a way to block all DNS on port 53 except for a specified device? I looked at SkyNET and the Asus WebUI and didn't see anything that really fi...
New site with updated guide After many requests, I made this tutorial for pyload entware version, works on the following routers: RT-AC66U/R, R...
I currently have a wd my cloud but the remote access required me to port trigger to redirect the default ports form 80 and 443 in order for it to work...

Don't Miss These

  • 1
  • 2
  • 3