Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

The RT3052 is an 802.11 b/g/n, 2T2R single chip with USB OTG, RGMII, SPI, PCM, I2C and UART interfaces and the RT3050 is an 802.11 b/g/n, 1T1R (1 Transmit 1 Receive) single chip with USB interface.

Both chips have a MIPS24KEc processor and can support up to 256 STAs and up to 8 BSSIDs. WEP, WPA and WPA2 wireless security are supported as well as Wi-Fi Protected Setup (WPS).

Reference design kits will be available that include software driver support for the Microsoft Windows Vista and Linux 2.6. Samples are slated for next month (June 2008). Pricing was not announced.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello everyone,I'm looking to replace an older Linksys E1200v2 router with Freshtomato installed on it with a better router that provides higher throu...
Last weekend i could successfully AiMesh my main AC5300 with AC68U.. very happy about this just one thing i could not understand about this setupmy A...
By the looks of it, the BCM43684 is WiFi 6 Certified!https://www.anandtech.com/show/14875/wifi-6-is-officially-here-certification-program-begins
"Today, we show that security controls put in place by device manufacturers are insufficient against attacks carried out by remote adversaries."‚Äč Loo...
Hi,I set it up using the PC as I was not able to connect using the Unifi Network App.As I tried using the App later on it say it was already paired to...

Don't Miss These

  • 1
  • 2
  • 3