Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

EnGenius logoEnGenius has announced two "business-grade" 2.4 GHz access points.

The ECB300 Business-Class Indoor Long-Range Wireless-N Access Point/Client Bridge and ECB150 Long-Range Wireless-N Indoor Access Point/Client Bridge are 2.4 GHz 802.11bgn access points with maximum transmit power of 29 and 26 dBm, respectively.

Aimed at multiple AP business deployment, both access points support AP, client bridge, WDS access point, WDS bridge, repeater, and AP router modes.

EnGenius ECB300 and ECB150 802.11N access points

Other features include WPA/WPA2 Personal and Enterprise wireless security, MAC address filters, client isolation, four SSID's with VLAN mapping, and 802.3af PoE.

The ECB300 has two upgradable 5 dBi antennas (RP-N connector), while the ECB150 has one. Both can be managed via web-based admin consoles or EnGenius Zone Controller software.

The ECB300 and ECB150 are shipping now at $99.99 and $79.99 MSRPs, respectively.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I am trying to modify /etc/smb.conf file, but it appears that the changes get overwritten from some other location. I SSH into the box, use nano to ed...
Hi all.I am facing some issues in connecting my Tasmota Sonoff wifi switch to the router.I see that the switch is connecting for about 15 seconds and ...
I had been running 384.14 for over a month of my AC88U. I installed 384.14_2 when it came out on Jan 1st. I left on a trip overseas on Jan 9 for a few...
Hello, yesterday i installed firmware version 384.14.2 everything works good but if i connect to front USB (3.0) one HD something happen to 2.4ghz net...
Hi. On my router ASUS RT-AC88U the country code is EO. The router works stably. However, it shows that there is a new firmware. If I update the firmwa...

Don't Miss These

  • 1
  • 2
  • 3