Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

D-Link logoD-Link has started to ship a mobile AP/storage sharer announced at CES.

The DIR-505 All-in-One Mobile Companion introduced at January's Consumer Electronics show is a single-stream 802.11b/g/n travel router with USB 2.0 port for drive sharing and device charging.

D-Link DIR-505 All-in-One Mobile Companion

D-Link DIR-505 All-in-One Mobile Companion

With D-Link's SharePort Mobile app for iOS and Android, you can play, view and otherwise access files stored on attached USB storage.

A 10/100 Ethernet port even lets you share an Ethernet connection via an Access Point mode. The device also supports wireless repeater and "HotSpot modes" selectable via the switch shown in the photo above.

D-Link DIR-505 ports

D-Link DIR-505 ports

The DIR-505 is out now for $69.99 MSRP.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi allI've spent a week tracking down a VERY annoying problem. Every few seconds, my WiFi (any band/channel) on my desktop computer encounters packet ...
I don't know where the industry is heading, but I'm starting to understand that I am a minority for wall mounting my routers, and prefer them in white...
I read the manual but couldn't find out what's the difference between "Time", "Block" and "Disable" in Time Scheduling. What are those options used fo...
HelloNoob question here..Is there any way to easily isolate a wired client from the rest of the local LAN? I want to deny a wired IOT device access to...
I recently added some IP cameras to my network to work with Blue Iris. Once they were connected, i logged into each camera and set a static IP on them...

Don't Miss These

  • 1
  • 2
  • 3