Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

D-Link logoD-Link has announced a compact wall-plugged wireless range extender.

The DAP-1320 Wireless Range Extender is a 2.4 GHz "N300" wireless repeater that works with all routers and access points, not just those supporting WDS repeating.

The extender is roughly a two inch cube with built-in power supply that can be plugged right into a wall outlet.

It supports 802.11bgn devices and features easy WPA/WPA2 wireless security setup via push-button Wi-Fi Protected Setup (WPS). It has no Ethernet port, so cannot be used as an access point.

D-Link DAP-1320

D-Link DAP-1320

The DAP-1320 is available now for $49.99 MSRP.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Stubby is an application that acts as a local DNS Privacy stub resolver using DNS-over-TLS. Stubby encrypts DNS queries sent from a client machine to ...
HelloI have RT-AC87U Router with latest Merlin firmware and my network have access to address starts from 192.168.10.1 to 192.168.11.254. My IP of rou...
As you already noticed entware-ng (http://pkg.entware.net/binaries/mipsel) doesn't get updated anymore.The repo on github is archived (read-only) and ...
Hi,I have RT-AC86U on latest merlin FW 384.7. At the same time i have 2 x 1Gpbs connection from 2 diff ISPs.I have configured load-balancing ratio of ...
Any ideas on how to get overclocking working on RT-AC68U running 384.7? I am using JFFS scripts to set clkfreq to 1200,666. This is working (verified ...

Don't Miss These

  • 1
  • 2
  • 3