Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

CES 2014 logoLinksys is reviving its WRT router family at CES 2014, leading off with a 4x4 AC1900 design.

Consumer wireless router makers are always looking for ways to entice us to buy their top-of-line—aka most expensive—offerings. Linksys is trying nostalgia as its latest ploy by harkening back to its iconic WRT54G router.

The Linksys WRT1900AC Dual Band Wi-Fi Router looks will definitely remind you of the company's old standby, but significantly butched up. The WRT1900AC's specs, however, are definitely from the present, using a 4x4 design.

The hardware platform includes a 1.2 GHz dual-core ARM-based processor backed by 256 MB of DDR3 RAM and 128 MB of flash. Storage and printer sharing is supported by one USB 3.0 port and a combo USB 2.0 / eSATA (eSATAp) port. Gigabit WAN (1) and switched LAN (4) ports round out the design. The four external dual-band antennas are removable and fully adjustable, too.

Linksys WRT1900AC Dual Band Wi-Fi Router

Linksys WRT1900AC Dual Band Wi-Fi Router

The software side of the product is intended to quicken a networking geek's pulse as much as the hardware. For those who don't want to mess with factory firmware, the WRT1900AC will ship with Linksys' Smart Wi-Fi firmware. But for the tweakers among us, the company also plans to post an OpenWRT based flash by the time the first routers ship. In support of that, the company will be seeding SDKs and hardware to select developers soon.

Even though this is a 4x4 (four transmit and four receive channels), the WRT1900AC is a three-stream design with 600 Mbps 2.4 GHz link rate and 1300 Mbps 5 GHz maximum link rates. The extra transmit/receive channel supports antenna diversity and also improves receive gain; all to provide greater range than current 3x3 designs.

Also new with the WRT1900AC is a new Smart Wi-Fi Network Map feature. Network Map integrates features into the router's browser interface that previously could be access only via its Smart Wi-Fi apps. Users can simple manage the router by clicking on its icon and change parental control settings, select wireless bands, filter by device type, or even remove devices from the network.

Linksys Smart Wi-Fi Network Map

Linksys Smart Wi-Fi Network Map

The Linksys WRT1900AC Dual-Band Wireless-AC Router is planned to start shipping this spring at a eye-popping MSRP of $299.99.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I've been a fan of ASUS routers for quite some time. My first one was a N66U. I loved the interface and how I could put different firmwares on it. I w...
Not sure if this is the right place to post this. I have an ASUS AC86U and with AES-NI it kicks OpenVPN butt. However, I am unsure of how likely it is...
Hello Im setting up a openvpn server on a remote asus router (AC56R). Router ip is 192.168.1.1Router openvpn server ip is 10.0.3.1openvpn is working o...
Hi,My IP WAN is ok... ...but the Server Certificate shows my LOCAL IP like this: View attachment 18667Lookup its ok for DDNS:...IP Wan invalid for H...
Hello,After a long time, I have recently updated my merlin software on my 86U. After upgrading, OpenVpn does not connect anymore. I keep getting an er...

Don't Miss These

  • 1
  • 2
  • 3