Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

ZyXEL logoZyXEL has announced an AC1200 class access point.

The NWA1123-AC Ceiling Mount PoE Access Point is a plenum-rated "smoke detector" style AP supporting maximum link rates of 300 Mbps and 867 Mbps in 2.4 GHz and 5 GHz bands, repspectively. Its single Gigabit Ethernet port supports 802.3af PoE for one-cable connection.

ZyXEL NWA1123-AC

ZyXEL NWA1123-AC

Other features include AP, wireless client and repeater modes and multiple SSID, VLAN, IPv6 and MAC filtering support. Management is via built-in web interface, command line and SNMP.

The NWA1120 series also includes the N300 class 2.4 GHz only NWA1121-NI and N600 class simultaneous dual-band NWA1123-NI.

The NWA1123-AC is shipping now at an MSRP of $199.

More Wireless

Zyxel logo

Wi-Fi Mesh System Secrets - Here's how to get the most out of your whole home mesh WiFi system.

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,I am trying Aimesh with a AC86U as a router node, and AC68 as a Edge Node, however, I got very bad wifi performance, and only get 30Mbps performanc...
i know 802.3af standard is limited to 100m. i would like to install an access point 800' away from my switch. POE extenders are an option, but does an...
*** WARNING: This is a post aimed to newbies like me! ***‚Äč Hi there,I just managed to successfully install Merlin's firmware (june 2018) to my AC68U ...
I am using AC66U-B1 with stock firmware,I open guest network at 2.4Ghz but I dont't want to expose real MAC to guests.I want to change 2.4gHZ MAC addr...
Two routers provide different LAN address spaces. 1) Gateway address 192.168.0.1 with clients on the 192.168.0.0/24 subnet 2)Gateway address 10.0.0.1 ...

Don't Miss These

  • 1
  • 2
  • 3