Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

D-Link logo D-Link has announced an 802.11ac indoor access point .

The DWL-8610AP Unified Wireless Concurrent Dual Band 802.11ac Access Point is an AC1750 class indoor access point supporting maximum link rates of up to 450 Mbps on the 2.4 GHz band, and 1300 Mbps on the 5 GHz band. The AP also can be configured as a WDS bridge / repeater.

Network connection is via dual Gigabit Ethernet ports, with one supporting 802.3at PoE. The plenum-rated enclosure houses omni-directional antennas with gains of 5 dBi for 2.4 GHz and 6.5 dBi for 5 GHz.

Features include Wi-Fi scheduler, band steering, programmable client limit, automatic RF management, fast roaming, captive portal and internal RADIUS server. Management is via HTTP/HTTPS web console, SNMP or command line via telnet or SSH.

D-Link DWL-8610AP

D-Link DWL-8610AP

Up to 16 DWL-8610APs can form a self-configuring cluster, where a root AP's settings are automatically cloned to other members of the group. The AP also is compatible with D-Link Unified Switches and Wireless Controllers, allowing central management of up to 256 access points.

The DWL-8610AP is covered by a limited lifetime warranty, lists for $799.99 and is available shortly.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

One of the reasons I just bought an AC68U was because I wanted the Traffic Analyzer.Apparently enabling this requires "that your information will be c...
Im sure this question has been asked before but I am trying to connect my AC3200 to a Meraki MX64. MX64 supports L2TP with PSK. Asus Merlin doesnt hav...
Hey allSo i have two netgear switch models.I have two nighthawk s8000 and two netgear GS 108's. Both 8 ports. My cable is 1 gigabit and and my system ...
So, I currently have 2 routers. One is a Linksys and the other is an ASUS, I don't think models really make a difference in the scenario. Basically, I...
When I click on "guest Network" I get this screen instead of the normal setup screen. Any ideas? total noob here...thanks

Don't Miss These

  • 1
  • 2
  • 3