Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

TP-LINK logo TP-LINK has started to ship its first "tri-band" router.

The Archer C3200, which was announced at CES 2015, uses Broadcom's XStream "tri-band" architecture, with three radios—two 3x3 5 GHz and one 3x3 2.4 GHz. Maximum link rates of 1300 Mbps for both 5 GHz radios and 600 Mbps for the single 2.4 GHz radio justify its AC3200 classification.

Features include six non-upgradeable external antennas, Gigabit WAN (1) and switched LAN (4) ports, USB 2.0 and 3.0 ports for storage sharing and "Smart Connect" technology to automatically steer clients between the two 5 GHz radios.

TP-LINK Archer C3200

TP-LINK Archer C3200

The Archer C3200 is initially exclusive to Fry's and TP-LINK's online store, with other retailers coming "soon". MSRP is $259.99 with a two-year limited warranty.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have just upgraded from an AC68U to an AC86U. I setup the 86U with the exact same settings (at least I think they are) as the 68U, however the Wifi ...
I tried to set it up, but I am failing - not for the first time. This time, I have a very basic scenario, one PC is solely a torrent box atm, so I wou...
Previously was using Merlin on my R7000 and I made a post about the WAN MAC Addres showing an old MAC Address from my previous ONT.... Now I am runnin...
I just installed merlin on my AC88U and i see all these settings in fq_codel area but when ever i select anything it doesn't change and am i supposed ...
Hey all,I've been using a 3 router AiMesh (AC66u B1, AC5300, GT5300) setup for awhile. They are all connected via Ethernet. I did a firmware (3.0.0.4....

Don't Miss These

  • 1
  • 2
  • 3