Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

How many AP's does it take to test a tri-mode card?

I expected the WAG511 to have the same superior 802.11b performance as Atheros' dual-mode (a/b) design, but had a hard time proving it with the Access Points that I initially used for my testing. I found the WAB102's 11b radio to be, frankly, awful, as you can see in Figure 10.

NETGEAR WAG511 - 11b throughput with WAB102

Figure 10: 11b throughput with WAB102 AP
(click on the image for a full-sized view)

You see only three traces in the plot because I couldn't get a signal at my Condition 4 worst-case location. Given the excellent performance of the Atheros 11b radio in previous testing, I can only say that the WAB102's 11b radio must be particularly bad to cause the WAG511 to not be able to get a signal. I shared my findings with NETGEAR, who sent me a soon-to-be-released WAB102 firmware update that they said should improve performance, but didn't.

My next attempt at 11b mode testing was with the WG602. Since it has no mode controls, I tried forcing its transmit rate to 11Mbps in hopes that it would get the hint. But since the WAG511 client (and my throughput test results) showed that it was transmitting at 11g rates, I had to abandon that approach.

I finally grabbed an SMC2655W 11b AP and did a quick set of Chariot runs, which as Figure 11 shows, proved my expectations of the WAG511's excellent 11b radio.

NETGEAR WAG511 - 11b throughput w/ SMC2655W

Figure 11: 11b throughput with SMC2655W AP
(click on the image for a full-sized view)

One more mode left, and then the wrap up.

802.11g Wireless Performance Test Results

Test Conditions


- WEP encryption: DISABLED
- Tx Rate: Automatic
- Power Save: Disabled
- Test Partner: NETGEAR WG602 54Mbps Wireless Access Point

Firmware/Driver Versions

AP f/w:
1.04.00
Wireless client driver:
2.3.0.73 WinXP
Wireless client f/w:
No Info

Test Description Signal Quality (%) Transfer Rate (Mbps) Response Time (msec) UDP stream
Throughput (kbps) Lost data (%)
Client to AP - Condition 1 100 19.3
[No WEP]
18.6
[w/ WEP]
1 (avg)
2 (max)
499 0
Client to AP - Condition 2 95 19.2 1 (avg)
3 (max)
499 0
Client to AP - Condition 3 73 19.3 1 (avg)
5 (max)
499 0
Client to AP - Condition 4 68 17.5 2 (avg)
5 (max)
499 0
See details of how we test.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Aquantia has a new firmware update out for the AQC100, AQC108, AQC107 and AQN100, AQN108, AQN107https://www.aquantia.com/support/driver-download/The f...
I have an AC68u and I put two fans behind it to cool it off. I used a double-sided tape to attach the fan but it fell off after three days.I saw some ...
https://fccid.io/MSQ-RTAXI600
I am pleased to announce the release of CakeQOS-Merlin!Current Version: 1.0.2 (Changelog)CakeQOS-Merlin is a custom add-on for supported Asus routers ...
It appears that in the router settings/ui, this is under Firewall>Network Services Filter, but there are a few boxes that I am unsure how to fill, spe...

Don't Miss These

  • 1
  • 2
  • 3