Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Other Switch Features

The Marvell switch chip gives the GS5 plenty of other managed switch capabilities normally seen in products costing about twice as much. Experienced networkers may find more use for some of these features than newbies, but don't let that stop you from exploring them. But I'll warn you that playing with some of them and not knowing what you're doing can mess you up enough to require hitting the ol' reset-to-defaults button.

Enabling the Spanning Tree Protocol (STP) feature (off by default) allows the GS5 to be used in redundancy applications and larger network configurations. Linksys provides global controls for Maximum Age, Hello Time and Forward Delay and per-port control of Priority and Cost and readout of STP State. The User Guide and on-line Help provide a little helpful information about each control, but again, not enough to help you to really understand how to use them.

Tip TIP: This O'Reilly article can help you get up to speed on STP.

The RMON Statistics page (Figure 6) provides more than you'll probably need to know about the low-level Ethernet statistics of each port. But the nice thing is that you can remotely check each port to see if traffic is flowing.

Linksys WET54GS RMON stats screen

Figure 6: RMON stats
(click on the image for a larger view)

Tip TIP: RMON is actually a spec implemented by many enterprise-level networking products. Learn more from this whatis definition and Cisco article.

If you've ever tried to run a network protocol analyzer (or "sniffer") such as the free, Open Source Ethereal, you've probably discovered that you can only see the traffic for the machine that the analyzer is running on and not other devices plugged into a switch. One solution to this problem is to dig up an old network hub, which sends data received on any port to all other ports.

The preferred solution, however, is to use a switch with Port Mirroring capability (Figure 7), which is precisely what the GS5 provides. The GS5's controls enable you to copy traffic from the From Port that contains the device you want to monitor to the To Port where you would connect your network analyzer.

The feature is disabled by default, but can be set to Monitor egress (traffic exiting the From Port) or Monitor both (traffic in and out of the From Port).

Linksys WET54GS Port Mirroing page

Figure 7: Port Mirroring
(click on the image for a larger view)

The top part of the page contains a handy at-a-glance status board for all the GS5's ports, too. This is one case in which a programmable page auto-refresh would have been handy for continuous monitoring of the GS5's status.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Asuswrt-Merlin 384.19 is now available for all supported models, except for the RT-AX56U (no up-to-date GPL available for that model).The main changes...
Version MBytesASUS RT-AC68U Firmware version Fixed RCE vulnerability.
I plan to make available a beta version of the next kamoj add-on - if there is enough interest.N.B: Voxel firmware is a pre-requisite, not an option!I...
Main goal of this release: additional boost of the router performance as I hope (slight boost ). I succeed to change GCC compiler from the version 9....
I am using an Asus AC3200 router with V384.13.8 firmware.I have purchased a number of Devolo powerline adapters but am having problems using them.The ...

Don't Miss These

  • 1
  • 2
  • 3