Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

At a glance
ProductIgnition Design Labs Portal (Portal-PCW-110-COM)   [Website]
SummaryAC2350 class router with Gigabit Ethernet ports and mesh capability. Supports DFS 5 GHz channels
Pros• Supports three stream 2.4 GHz and four-stream 5 GHz client connection for good backhaul
• Supports all DFS channels allowed in region
• Supports storage sharing
Cons• Wired router throughput may be iffy for gigabit-grade services
• Storage sharing is very slow
• Features still a work in progress

Typical Price: $64  Buy From Amazon


The past few years have seen a number of upstarts hit the Wi-Fi scene, bringing new approaches to shake up the status quo. Ignition Design Labs (IDL) came out of stealth at CES 2016 to reveal technology aimed at enabling easier access to DFS channels. I covered the whys and wherefores on this in my CES 2016 wrapup, so won't repeat it here. In addition to pursuing OEM deals with service providers and others, IDL decided to spread the word about its technology more broadly by fielding a consumer router.

IDL's Portal started life as a traditional single point router. But its makers saw the Wi-Fi "mesh" handwriting on the wall and decided to incorporate that technology shortly before it started shipping late last year. So you can buy it as a single router ("ideal for most homes and apartments") or a two-pack ("best for very large homes"). Prices have come down on both and are currently at around $179 for one and $319 for two.

Portal comes in a comparatively large glossy white plastic box that sorta reminds me of a (really big) squashed jelly bean. Although it doesn't scream Router! by bristling with antennas, it's large enough to call attention to itself.

Portal and eero

Portal and eero

There is only one light (the "O" in the portal logo) on the top uses colors and blinking to indicate status. When everything is okey-dokey, the "O" is lit with a subtle solid green.

Portal LED colors

Portal LED colors

All connections are on the rear as shown below. All the ports are Gigabit but the USB ports are 2.0. At least they can share an attached drive, unlike all other distributed Wi-Fi systems (DWS) to date. Both FAT and NTFS formatted drives are supported, but only the first partition for now. The bottom cover has plenty of cooling slots, but there are none on the top or sides. Despite this sub-optimal design, Portal's top didn't get noticeably warm. The bottom cover also has wall-mount slots that let you hang Potal so its connectors point toward the floor.

Portal rear panel

Portal rear panel


IDL didn't play cute with Portal's FCC internal photos, which allowed identification of all key components. The view below with the bottom cover removed shows why all the air vents are on the bottom cover. The top side of the board has RF cans, but no heatsinks.

The three larger antennas are for the 3x3 2.4 GHz radio; the four smaller are for the 4x4 5 GHz radio. This combination makes Portal an AC2350 / 2400 class router. There is also an eighth antenna that sits up near the logo beneath the top cover. This connects to the "secret sauce" module that I'll describe shortly.

Portal inside

Portal inside

The next view shows the heatsink and RF can tops stripped away to show the 2.4 (right) and 5 GHz (left) radios.

Portal board - side 1

Portal board - side 1

The empty connector between the two radios holds Portal's "secret sauce" module (my term, not IDL's). One of the photos in the FCC internal pictures file identifies this module as "2.4G/BT/BLE Module", but it's much more than that. The composite photo below shows both sides of the board, which are packed with interesting goodies. In addition to a CSR8811 Bluetooth 4.1 SoC, it also holds the Qualcomm dual-band monitor radio and dedicated Qualcomm "SpectrumBoost" co-processor that enables Portal's "zero-wait" DFS switching.

Portal board - side 2

Portal board - side 2

This monitor radio, plus associated cloud intelligence, lets Portal switch quickly back to the same DFS channel it vacates if radar is detected. Other routers that support DFS and don't have continuous monitoring must disconnect clients and listen for radar for a minute before resuming operation. The vacated channel must also be left unused for 30 minutes. Both requirements put a pretty big crimp in most routers' ability to use DFS channels, which is why (plus the additional FCC certification process) most products don't bother supporting DFS. Surprisingly, IDL doesn't talk about this much on their website, instead touting its "FastLanes™", which is IDL's marketing term for all this.

The component summary below shows the key components for Portal, Luma and eero. The comparison makes for an interesting study in how the three companies approach the design of mesh-capable nodes. Although its radios handle both client connect and backhaul duties, Portal is the only DWS product with a client-facing 4x4 5 GHz radio. Portal says it supports MU-MIMO on that 5 GHz radio, but I didn't check MU-MIMO operation. But since it's Qualcomm-based, it should support MU-MIMO devices just fine.

  IDL Portal Luma eero
CPU QCA9563 3x3 11bgn SoC (single-core) Qualcomm IPQ4018 2x2 a/b/g/n/ac SoC (quad-core) Qualcomm IPQ8062 @ 1 GHz (dual-core)
Switch QCA8337 QCA8075 QCA8337
RAM 256 MB 256 MB 512 MB
Flash 48 MB 128 MB
2 MB
8 MB
4 GB
2.4 GHz Radio - In QCA9563
- Skyworks SE2565T 2.4 GHz Hi-power Power Amp (x3)
- In IPQ4018
- Skyworks RFX8425 2.4 GHz RF front end (x2)
-QCA9982 2x2 MU-MIMO 802.11abgnac radio
- RFMD RFFM4204 2.4 GHz Front End (x2)
5 GHz radio - QCA9984
- Skyworks Sky85405-11 5 GHz power amp (x4)
- In IPQ4018
- Skyworks SKY85716-11 5 GHz RF front end (x2)
- QCA9982 2x2 MU-MIMO 802.11abgnac radio
- RFMD RFPA5522 5 GHz power amp (x4)
Bluetooth CSR8811 Bluetooth 4.1 Soc CSR8510 CSR8811 Bluetooth 4.1 SoC
Monitor - QCA9887 Dual-Band 1x1 MIMO 802.11ac/abgn WLAN SoC
- QCA4531 (2x2) IEEE 802.11b/g/n SoC
- 128 MB RAM
- 16 MB flash
Table 1: Component summary and comparison

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!


Over In The Forums

Hi,I last reported this issue about 3 weeks ago over GUI Feedback when one of my AiMesh Node (Bedroom) gone OFFLINE. I rebooted everything and all see...
Hi,My setup is as follows:ISP router -> various computers, zxytel t-50Lan->WanVPN Router,->Smart TV, Asus N66UI am trying to g...
Just run into this problem, Skynet had IP banned, had to manually unban the IP in the amtm cli.But why?ps wrong forum, cannot delete an...
Is that supported in Merlin firmware?The ax88u supports it, why the ax86u does not, any ideas?thanks
This is a step-by-step guide that will show how to optimally set up a USB drive for Asus’ RMerlin powered routers that will at the very minimum allow ...

Don't Miss These

  • 1
  • 2
  • 3