ASUS ROG Rapture GT-AC5300 Wireless-AC5300 Tri-Band Gaming Router Reviewed

Photo of author

Tim Higgins

ROG Rapture Wireless-AC5300 Tri-band Gaming Router
At a glance
Product ASUS ROG Rapture Wireless-AC5300 Tri-band Gaming Router (GT-AC5300) [Website]
Summary Broadcom-based three-radio AC5300 4×4 router with MU-MIMO aimed at gaming buyers
Pros • Eight gigabit LAN ports, two supporting 802.3ad aggregation
• Two USB 3.0 ports
Cons • Product is mostly hype. Gaming features already supported in RT-AC5300
• Wi-Fi Radar is unfinished and misleading

Introduction

Way back when, D-Link came up with the idea of “gaming” routers, starting, I think, with the DGL-4300 back in 2005. The usual approach was to paint it black, throw in (or promote) a performance-based feature (it was a gigabit Ethernet switch in the DGL-4300) and re-skin the admin GUI, preferably also in black (and red).

ASUS has pretty much stuck to this playbook with its gaming routers. The first grab for gamers’ wallets was the RT-AC88U, a gamerized version of the RT-AC3100. Its chief claims to gamer fame were four extra ports, some red physical accents—antennas and heatsinks(!)—and the addition of support for AAA Internet Publishing’s WTFast.

The ROG Rapture GT-AC5300 Wireless-AC5300 Tri-Band Gaming Router amps things up a bit more. The GT is part of ASUS’ Republic of Gamers brand that includes laptops, desktops and computing accessories for those who like their gear to imply badass skilz. For about 40 bucks more than the RT-AC5300, the GT doubles flash and RAM size, doubles the number of gigabit LAN ports—adding 802.3ad link aggregation on two of them—and moves up to a quad-core processor from dual-core vs. the RT. The GT’s admin GUI also has a gamer motif and throws in a few more gamer-bait features.

Aside from the different logos on the top grille and connectors on rear panels, you’d have to look carefully to tell the GT and RT apart. Top and bottom venting for cooling is the same and the GT also lacks mounting screw slots.

ASUS GT-AC5300 and RT-AC5300

ASUS GT-AC5300 and RT-AC5300

Gamers must not like indicator lights because the RT’s set of tiny lights is carried forward to the GT. There is still only one indicator for all LAN ports. For the price and target audience, I’d expect link/activity lights on each port.

ASUS GT-AC5300 callouts

ASUS GT-AC5300 callouts

Comparing to the RT’s callout diagram below, we see the second USB port has been moved to the rear panel and it’s USB 3.0, not 2.0. Note the GT’s eight gigabit Ethernet ports include two ports marked Link aggregation and two marked Gaming. The information you see above is all the User Manual has to say about either.

ASUS RT-AC5300 callouts

ASUS RT-AC5300 callouts

ASUS has added ridged rubber grommets around each antenna connector in an attempt, I suppose, to cure the RT’s floppy antenna curse. These do no good, since the antenna body doesn’t touch them. But the GT’s antennas, which are taller and slimmer than the RT’s, seem to have more rotation friction and didn’t flop once during my time with the product.

Inside

I was surprised to find the GT and RT have the same FCC ID (MSQ-RTGZ00), although they have significant differences on the inside. The FCC now apparently allows multiple hardware revisions to be registered under the same ID. The Class II change letter calls out three versions and references a test report. The table below, taken from page 5 of that report, shows four revisions, however. But the only version number marked on the product box or product serial number label is the Hardware revision, which is A. So I opened up the review sample to investigate, after testing was completed.

ASUS FCC ID MSQ-RTGZ00 model differences

ASUS FCC ID MSQ-RTGZ00 model differences

Since ASUS advertises the GT as having a quad-core processor, that would mean it’s either Rev 1.311 or Rev 1.411. The photo below clearly shows the GT board is marked 1.41. Heatsinks and RF can tops have been removed.

GT-AC5300 board

GT-AC5300 board

The view below with the bottom cover removed shows more heatsinks. The general layout and construction is fairly close to that shown in the old FCC internal photos. The ASM1182e PCIe switch is no longer needed since the BCM4908 has enough PCIe ports built in to handle the three radios.

GT-AC5300 inside bottom view

GT-AC5300 inside bottom view

All key components are summarized in Table 1 and compared to the RT-AC530. It looks like the Gaming (ports 1 & 2) and Link Aggregation (ports 5&6) connect to the BCM4908 and the others to the BCM53134 switch. The four antennas at the front of the box are shared between the 2.4 and 5 GHz low-band radios; the rear four connect only to the 5 GHz high-band radio. Note the BCM4366 is the "E" version. This is allegedly one of the revisions required to produce decent MU-MIMO.

ASUS GT-AC5300 ASUS RT-AC5300
CPU Broadcom BCM4908 64 bit quad-core @ 1.8 GHz Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz
Switch Broadcom BCM53134 Realtek RTL8365MB or in BCM4709C0KFEBG
RAM 1024 MB 512 MB
Flash 256 MB 128 MB
2.4 GHz Radio – BCM4366E 4×4 2.4/5G single chip 802.11ac SoC
– Skyworks SE2623L 2.4 GHz power amp (x4)
– BCM4366 4×4 2.4/5G single chip 802.11ac SoC
– Skyworks SE2623L 2.4 GHz power amp (x4)
5 GHz radio 1 – BCM4366E 4×4 2.4/5G single chip 802.11ac SoC
– RFMD RFPA5542 5 GHz PA module (x4)
– BCM4366 4×4 2.4/5G single chip 802.11ac SoC
– RFMD RFPA5542 5 GHz PA module (x4)
5 GHz radio 2 – BCM4366E 4×4 2.4/5G single chip 802.11ac SoC
– RFMD RFPA5542 5 GHz PA module (x4)
– BCM4366 4×4 2.4/5G single chip 802.11ac SoC
– RFMD RFPA5542 5 GHz PA module (x4)
PCIe None ASMedia ASM1182e
Table 1: Component summary and comparison

The radio test report in the 1/30/17 Class 2 change filings makes for interesting, although confusing, reading. It calls out seven different antenna sets, some of which have lower gain, according the the Class 2 letter. The antenna key diagram below from page 11 of the radio test report shows the 5 GHz high band (Channels 149-165), identified as "Band4", gets the rear four antennas to itself in the GT ("Version 2"), but shares the front four with the 2.4 GHz radio in the RT ("Version 1").

GT-AC5300 antenna key

GT-AC5300 antenna key

Features

If you look at ASUS’s feature comparison, you don’t see much difference between the GT and RT. The GT supports link aggregation, while the RT doesn’t. But both support Traffic Analyzer, Adaptive QoS, AiProtection and Parental controls. The comparison table is obviously flawed, since it makes no mention of WTFast and Game Private Network supported by both.

The larger comparison omission is the GT’s VPN support, which is the same as the RT’s and includes both PPTP and OpenVPN servers and PPTP, L2TP and OpenVPN client.

GT-AC5300 antenna key

GT-AC5300 antenna key

The short story here is if you’re looking for game-specific support, you already have most of what the GT has if you already own an RT (minus the kewl gamer GUI look). The GT just moves things around a bit. You’ll find QoS and Traffic Monitor under Game Boost on the GT, but that menu on the RT holds WTFast, LAN Boost (a quick configuration of Adaptive QoS) and AiProtection jump points. The unique things the GT brings to the party are the dashboard…

GT-AC5300 Dashboard

GT-AC5300 Dashboard

…Game Profile (aka port forwarding presets for games)…

GT-AC5300 Game Profile screen

GT-AC5300 Game Profile screen

…and Game Radar and Wi-Fi Radar menus. Game Radar shows ping times for popular game servers. But you can’t change the Game list or server locations.

GT-AC5300 Game Radar screen

GT-AC5300 Game Radar screen

Wi-Fi Radar contains tools commonly found in the many Wi-Fi scanning apps available. I give ASUS an "A" for effort, but an F for implementation. Each icon shown below takes you to a tab on the same screen.

GT-AC5300 Wi-Fi Radar screen

GT-AC5300 Wi-Fi Radar screen

The screen shows only one radio at a time and is very long, requiring a lot of scrolling around. I homed in on Channel Statistics.

GT-AC5300 Wi-Fi Radar Site Survey screen

GT-AC5300 Wi-Fi Radar Site Survey screen

The problem with all Wi-Fi troubleshooting apps to date is that they don’t measure channel use. They can tell you how many APs are in range, channels they’re on, signal strength, etc. But they can’t tell you anything about the activity in each channel, i.e. how busy it is. Channel activity, not signal strength, is what you want to avoid in neighboring networks if you want maximum bandwidth.

Unfortunately, ASUS does not appear to be measuring channel capacity, either. I ran a quick check by blasting traffic on Channel 40 on one 5 GHz radio and Channel 153 on the other, using 80 MHz bandwidth for each, which takes up four 20 MHz channels.

The octoPal client reported channel congestion (use) in the 90% range for each channel. But Wi-Fi Radar said over 80% of the capacity in each channel was available! The bars below should all have been 10% or lower.

GT-AC5300 Wi-Fi Radar Channel Capacity screen

GT-AC5300 Wi-Fi Radar Channel Capacity screen

The Advanced Troubleshooting tab supposedly offers plots of all the Wi-Fi statistics shown. Just the ability to see packet retries alone would be a huge help in troubleshooting Wi-Fi connection problems.

GT-AC5300 Wi-Fi Radar statistic categories

GT-AC5300 Wi-Fi Radar statistic categories

But the only categories working right now appear to be Rx CRS Glitches, Bad PLCP and Bad FCS shown below. The User manual is no help for any of this, so you’ll need to hit your favorite search engine for definitions. (Hint, these aren’t going to help much with determining why your client keeps disconnecting.)

GT-AC5300 Wi-Fi Radar statistic plots

GT-AC5300 Wi-Fi Radar statistic plots

ASUS clearly has more work to do here. The erroneous Channel Capacity "feature" is going to cause a lot of unnecessary confusion and frustration if people try to use it.

Storage Performance

The Router Charts graphs below show storage benchmark write and read results using our standard procedure with USB 3.0 connections and NTFS drive format, for the four products tested so far with the Revision 10 process. I made sure the Reducing USB 3.0 interference setting in the 2.4 GHz Wireless Professional settings tab and iTunes, DLNA and FTP servers were all disabled before running the tests. I even rechecked the RT-AC5300, running USB 3.0/NTFS tests only.

There is obviously still something wrong with the RT-AC5300’s USB 3.0 connection, given it yielded only 31 MB/s write and 34 MB/s read. But whatever’s wrong with the RT has been solved with the GT, since it produces much higher throughput.

Storage Performance Comparison - USB 3.0 / NTFS

Storage Performance Comparison – USB 3.0 / NTFS

The GT isn’t best in class for storage performance, however. Switching to the Chart Revision 9 view shows Linksys’ WRT3200ACM still claims the top spot, producing over 100 MB/s for both write and read. You can compare storage results between Revision 9 and 10 processes because the Storage test process hasn’t changed.

Routing Performance

Our new Revision 10 process focuses on performance and includes tests for Bufferbloat and reduced throughput due primarily to Cut Through Forwarding being automatically disabled when particular routing features are enabled. If you haven’t already, I suggest you read through the process description or even open it in another tab or window for reference while you read the commentary to follow.

The GT was tested with 3.0.0.4.382_12184 firmware. The RT was upgraded to 3.0.0.4.380_7627 and had a full retest for routing and wireless performance.

Test Description ASUS GT-AC5300 ASUS RT-AC5300
WAN – LAN Throughput (Mbps) 719 937
LAN – WAN Throughput (Mbps) 713 941
HTTP Score – WAN to LAN (%) 68.1 57.8
HTTP Score – LAN to WAN (%) 68.4 57.6
Bufferbloat Score- Down Avg. 450 518
Bufferbloat Score- Down Max. 317 382
Bufferbloat Score- Up Avg. 227 363
Bufferbloat Score- Up Max. 162 232
CTF Score (%) 64.5 35.4
Firmware Version 3.0.0.4.382_12184 3.0.0.4.380_7627
Table 2: Routing performance summary

The WAN – LAN and LAN – WAN throughput benchmarks are the least meaningful, since most products can hit these numbers due to the common use of Cut Through Forwarding. But it’s interesting that the GT with the more powerful processor has lower throughput measured in our WAN – LAN/LAN – WAN Throughput iperf3 tests.

Both GT and RT did much better in our HTTP Score than the NETGEAR R7000 and R7000P. The legend obscures the 759 KB file size results, which were 99.4% and 99.9% for the RT and GT, respectively. You can see the GT also hit the 100% mark with the 108 KB file size.

HTTP Score comparison

HTTP Score comparison
Plot key file size: [A] 2 KB, [B] 10 KB, [C] 108 KB and [D] 759 KB file

Both routers did pretty well with Bufferbloat. For reference, 5 ms of delay equals a score of 200 (1/5 x 1000) and higher numbers mean lower delay. Using that as reference, the GT’s maximum upload bufferbloat was around 6 ms and its average was 4.4 ms.

Finally, the Cut Through Forwarding tests showed the RT took more of a worst-case throughput hit than the GT. The biggest throughput drop was experienced by the RT, which ran at only 35% of its highest throughput on uplink when Adaptive QoS was enabled (941 Mbps to 333 Mbps). The GT’s biggest throughput stealer responsible for the GT’s 65% score was also adaptive QoS running uplink. It reduced normal uplink throughput of 713 Mbps down to 460 Mbps. But the GT’s score was higher than it would have been, had its normal throughput been 941 Mbps instead of 713 Mbps.

Wireless Performance

The GT-AC5300 and RT-AC5300 were tested with our Revision 10 wireless test process loaded with 3.0.0.4.382_12184 and 3.0.0.4.380_7627 firmware, respectively. Each router was reset to factory default after upgrade, then set to Channel 6 and 40 MHz bandwidth for 2.4 GHz and Channel 40 and 80 MHz bandwidth for the low band 5 GHz radio. The high band radio was set to Channel 153, but was not tested. WPA2/AES encryption was used for all connections. The Revision 10 process still uses 20 MHz bandwidth for 2.4 GHz tests for throughput vs. range, but uses 40 MHz for peak throughput tests. These settings are enforced by the octoPal test client.

The router body was centered on the test chamber turntable with all antennas vertical as shown in the photo below. The 0° position for the router had the front facing the chamber antennas. Although you see four chamber antennas in the photo, only the center two are used for throughput vs. attenuation testing, which is done with the octoPal set to operate as a 2×2 AC device. The two antennas at photo left will be used in MU-MIMO testing, once that process gets sorted.

ASUS GT-AC5300 in test chamber

ASUS GT-AC5300 in test chamber

Since four routers have now been tested with the Revision 10 process, I figured I’d throw them all into the throughput vs. attenuation plots for comparison.

The 2.4 GHz downlink profile shows the GT with superior throughput with strong to medium signals. But as signals grow weaker with higher attenuation, the throughput lines converge. As a result the range rankings, which use the 45 dB attenuation value, all end up the same.

2.4 GHz Downlink Throughput vs. Attenuation

2.4 GHz Downlink Throughput vs. Attenuation

2.4 GHz uplink shows all products running in a very tight group. The main difference here is disconnect points, with both NETGEARs hanging on to their connection a bit longer than both ASUSes.

2.4 GHz Uplink Throughput vs. Attenuation

2.4 GHz Uplink Throughput vs. Attenuation

5 GHz downlink clearly shows the ASUS RT and GT performing essentially the same and both with better performance than both NETGEARs.

5 GHz Downlink Throughput vs. Attenuation

5 GHz Downlink Throughput vs. Attenuation

5 GHz uplink has a tighter race, with the ASUS GT on top, the RT and NETGEAR R7000P closely matched, then the original R7000 Nighthawk joining up from the 21 dB attenuation point onward.

5 GHz Uplink Throughput vs. Attenuation

5 GHz Uplink Throughput vs. Attenuation

For our peak wireless performance tests, the octoPals are configured as 4×4 AC devices and left to negotiate their best connection, with 10 dB of attenuation applied on 2.4 GHz. The latter is necessary so the 2.4 GHz octoPal isn’t overloaded. After some initial head-scratching over low throughput, I figured out the octoPal front end was being overloaded on 5 GHz too. So 10 dB of attenuation was also added for the 5 GHz tests.

Since the octoPals report connection link rate, I saw 600 Mbps transmit and 800 Mbps receive link rates for both routers for the 2.4 GHz tests. For 5 GHz, 1733 Mbps link rates were the norm. These represent maximum rates for 256 QAM; the octoPal client does not support 1024 QAM.

Test Description ASUS GT-AC5300 ASUS RT-AC5300
2.4 GHz Peak Downlink (Mbps) 662 632
2.4 GHz Peak Uplink (Mbps) 432 432
5 GHz Peak Downlink (Mbps) 941 932
5 GHz Peak Uplink (Mbps) 943 948
Table 3: Peak Wireless throughput

I didn’t test MU-MIMO or Smart Connect.

Closing Thoughts

Although the GT-AC5300 now sits atop the Revision 10 Router Ranker, it’s too early to award it a Ranked #1 performance award. That may come after I get a few more routers through the new process. For now, it’s the top performing router tested with the new Revision 10 process. But it’s also the most expensive, too. For best price/performance, just sort the table by ascending price and you’ll find the NETGEAR R7000 takes that honor.

Large, expensive single node routers are losing market share to multi-node systems. But investing almost $400 in a single router can still make sense for some users. That said, if you already have an ASUS RT-AC5300, you’d have to be really motivated to trade up to the GT-AC5300. While the GT has better storage throughput and won’t lose as much wired routing throughput if you’re using adaptive QoS, wireless performance is pretty much the same. You might notice higher 2.4 GHz speeds from the GT with strong signals, but you’re not going to get significantly more range than you’re already getting from the RT-AC5300.

On the other hand, eight gigabit ports vs. four might be enough for some to justify spending the extra bucks for the GT.

Related posts

NETGEAR Cable/DSL Prosafe 802.11b Wireless Firewall Review

Wi-Fi certified 802.11b wireless router, w/ 4 port 10/100switch & print server. Bundled with zer0knowledge's Freedom Security and Privacy suite.

Arris SBX-AC1200P SURFboard Wireless Network Extender with RipCurrent Reviewed

Arris' SBX-AC1200P SURFboard Wireless Network Extender with RipCurrent is a nice little powerline-connected Wi-Fi extender, but trapped in a G.hn world.

Anyfi.net Reviewed

Updated - Anyfi.net lets you securely connect to your home network anywhere there is Wi-Fi... for free!