Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Basics

Patching in the Phones

The telco installer had naturally followed the T-568A wiring convention, which I had also chosen, so I didn't have to do any color code conversion when it came time to terminate one of the CAT5e cables from the demarc at the Leviton 47609-EMP Telephone Patching Expansion Board I had chosen for phone line patching.

Figure 11 shows a detail of the demarc CAT5e cable terminated to the Leviton board and also how both normal "data" patch (blue) and RJ11/RJ12 "phone" (beige) cables can be used for phone patching with this board.

Tip TIP: Don't assume that the wiring order for 8 position punch-down blocks is always the same. Always follow the color-coding instructions supplied with the patch panel!

Phone patch panel detail

Figure 11: Phone patch panel detail

(click image to enlarge)

Figure 12 is an expanded view showing the somewhat messy, but effective, system of patch cables between the Leviton board and the RJ45 patch panel that I had terminated all my "phone" runs into. I chose to install some of my DSL filters here instead of at the other end, which required the use of RJ11/12 cables for those patches. The larger beige box is a combo DSL filter / Y jack supplying an unfiltered connection to my DSL modem and filtered connection for my office phone line.

Phone patching

Figure 12: Phone patching
(click image to enlarge)

The nice thing about this system is that my "phone" lines can always be switched over to data use since they're CAT5e from end-to-end. I don't know if I'll ever switch over to IP phones and a mini VoIP PBX, but at least I can!

More Basics

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello all......just bought an RT - AX88U from micro center......I wanted to upgrade from my technicolor Tg1862g.....and use my own router......I must ...
Main goal of this release: additional boost of the router performance as I hope (slight boost ). I succeed to change GCC compiler from the version 9....
I have been using AiMesh on over many AiMesh models for the past year and I would like to share some thoughts on AiMesh. Opinions are my own. Discussi...
Asuswrt-Merlin 384.19 beta is now available (except for the RT-AX56U which won't be available for this release, due to outdated GPL code).Aug 9th: Bet...
There was a thread here by another poster. There were some disagreements and that thread was deleted. I found the script by @Martineau on Pastebin, bu...

Don't Miss These

  • 1
  • 2
  • 3