Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

The StorCenter ix4-200d comes in 2, 4 and 8 TB configurations and supports a single JBOD, RAID 5 or RAID 10 volume. It runs EMC's Linux-based Lifeline OS on a 1.2 GHz Marvell 6281 and 512 MB of RAM.

Other hardware features include dual Gigabit Ethernet ports can be configured in separate, failover and aggregation modes and three USB 2.0 ports for printer serving, Bluetooth dongle and UPS shutdown synchronization.

Storage can be configured to simultaneously support SMB/CIFS, NFS and AFP file sharing, Apple Time Machine storage and iSCSI targets. Scheduled or immediate backups can be done to USB-attached drives and over the network to rsync targets. EMC Retrospect is bundled for client backup.

Media features include UPnP AV / DLNA and iTunes media servers, Picture Transfer Protocol digital camera support, and CoolIris slideshow plug-in for photo viewing.

Other features include AD support, remote access via TZO dynamic DNS, VMware Ready Certification for both NFS and iSCSI storage for VMware vSphere, front panel LCD and QuikTransfer button for "one-touch" copying of selected files, support for up to five Axis network video cameras for real-time monitoring and video capture and email and SNMP alerts

The ix4-200d will start shipping next month for MSRPs of $699.99 (2 TB), $899.99 (4 TB), and $1,899.99 (8 TB).

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

HiAfter the upgrade from version .13 to .14, in the system log sometimes appears this message:Dec 15 14:38:08 kernel: pgd = ffffffc014024000Dec 15 14:...
Been running this RT-AC86U for a little over a month now. 1st thing I did was to load Merlin firmware which seems to be running fine. A short while b...
Hi Guys I'm totally new here, so forgive my ignorance. I've setup an RT-AC5300 at my in-laws home and put the Sky hub into Modem-Only mode (well, disa...
I'm trying to build NoDogSplash on AsusWrt Merlin 384.14. Compile is fine, configuration also ok. But when I start nodogsplash, it complaining that ip...
I just replaced my Asus 1900P running Merlin with a Netgear r7800 running Voxel 1.0.2.72SF. So far it seems to be running well. Was curious if there a...

Don't Miss These

  • 1
  • 2
  • 3