Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

CES 2015

CES logoAmped Wireless has announced two business class AC1750 wireless products

The APR175P Pro Series High Power AC1750 Access Point / Router can be configured as a router, access point or WDS Repeater / AP. It can also operate as a controller for up to seven other APR175P's set to "managed" mode.

The REB175P Pro Series High Power AC1750 Range Extender / Bridge uses the same hardware with a different firmware load to function as a "universal" range extender, "firewall" range extender, wireless bridge and WDS bridge.

Both are 3x3 AC1750 class designs supporting maximum link rates of 450 Mbps in 2.4 GHz and 1300 Mbps in 5 GHz.

Amped Wireless APR175P and REB175P

Amped Wireless APR175P and REB175P

The ProSeries' feature set supports up to 32 Wi-Fi networks, each of which has its own client isolation, bandwidth control, access control lists and schedules, VLANs, maximum users, MAC address filters and additional settings. Dual switched Gigabit Ethernet ports provide backbone connection and support VLANs and bandwidth control. One port supports Power over Ethernet to simplify installation.

As with Amped's other CES announcements, no pricing has been set for either product. Both will be available for order "early 2015".

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Is it possible to control LAN access via iptables? I have a bunch of IOT devices that I want to access the internet and (and this is the kicker) accep...
I have a pfSense box and need an 8-16 port managed switch to configure VLANS on both a wired network and a wireless AP. I would strongly prefer a POE ...
I recently enabled the statistics for traffic analyzer, and in the list of clients I was seeing this mac address I couldn't find on my network , I fou...
just a quick question, I have an rt-ac56u with 378.55 firmware on it, is it possible to update from 378.55 to 384.5 or is this too much of a jump??
HelloSorry if this is a repost of the same topic somewhere else.Im having issues when looking for devices at the traffic analizer page. I can see all ...

Don't Miss These

  • 1
  • 2
  • 3