Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Other Features

Tags:

Introduction

There aren't too many hi-tech CEOs that have had their entire work careers entirely with their present company. And thanks to the dot-bomb bust, there aren't too many hi-tech companies that have had consistent year-on-year growth and are still with us.

But when you talk to Steven Joe, the President and CEO of networking giant D-Link North America, you get to understand why the company has managed to thrive and beat many of its competitors. Last year the company launched about 60 products and is on track to deliver about the same this year, and commands a leading position in various networking segments, including USB, wireless, and low-end routers.

Steven Joe - President and CEO of D-Link North America

Steven Joe - President and CEO of D-Link North America

We met up with him last week at the company's headquarters in Fountain Valley, California. Here, 250 of the total worldwide staff of more than 3500 work in an office park that is within sight of a strawberry farm, showing the old Orange County with the new. All of D-Link's manufacturing is done in India, China or Taiwan, although the products are designed in the US along with the lion's share of project management.

Joe began his career at D-Link as a "jack of all trades" technical support technician when he was barely out of college 18 years ago and rose through the ranks to take over the top job in 2000. "When I started with the company, I did tech support in the morning, did packing and shipping in the afternoon, and product repairs before going home."

Joe was a graduate of UC Irvine, just down the road from his offices, and continues to be active with the university, and recruiting many of its graduates as engineers, something Joe is very proud of and also comments on its irony as well.

"I enjoyed my college time, I was a pretty good computer science student but didn't get straight A's. All my roommates were upset because they studied more than I. I am more of a last-minute engineer. The UC system is the strength of California education," he says, and recently was in Sacramento lobbying the legislature to continue funding and supporting the vast network of colleges throughout the state. "We are trying to remind them to support higher education and its trickle down effect for the California economy."

Wireless Innovation

D-Link continues to release wireless products and be a major innovator in the segment. "We have had a good run with consumer wireless for 5 years," Joe says. They announced a new partnership with Trapeze a few weeks ago at Interop that will have both companies working together on future products. Joe said they were excited about Trapeze because "they have some very strong software, and a very strong management team as well." He is interested in expanding them into the SMB marketplace while enabling them to deliver products that are more cost effective by using some of D-Link's designers and overseas manufacturing methods and sources.

What about 802.11b products? There is still plenty of life left in them, according to Joe. "11b is still strong in overseas markets. Most of what is sold in both the consumer and business sector in the US today is 11g, mainly because it is backwards compatible with 11b. We see tri-band - networks that support 11a,b, and g - more for the high end digital home applications, because as you go with more video-on-demand types of applications they require the higher frequencies. Also, we find that tri-band cards are used more and more in Korea and Japan, but in US adoption is quite slow still. We think that as we need more bandwidth, that will drive the need for tri-band."

D-Link has partnered with Atheros for many of their wireless networking products. As we covered in an earlier article, Atheros will make its Jump Start automatic security configuration software open source, "Something we believe in," says Joe. "Eventually you will have multiple brands, and everyone wants their products to work together. My stereo system at home isn't made by a single vendor. We don't expect everyone to just buy all D-Link products. We are also working with Microsoft so you can configure your digital home products completely within Longhorn when it comes out, so that is another path for us."

Speaking of wireless security, D-Link has also made an effort to support the more stringent WPA encryption standard, with more than 80% of products supporting it currently. This probably reflects Joe's own "techno-geek" heritage, and he even secures his home with dual firewalls because "I know what can happen because of what I can do to my friends and neighbors. You need to protect yourself."

More Stuff

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello. I am using latest Merlin firmware for my asus ac88u. I am having this strange problem with all my network printers. I have one printer connecte...
So, this is a thing that has bugged me for a long time. When I am on the Network Map page, I see the clients connected with 31 connected clients. Then...
My GT-AC5300 is only getting between 50mbps and 150mbps. I have a gigabit connection. From the modem directly, I get 900mbps. I've changed cables and ...
Hi folks, Wondering if you're able to help. Recently upgraded from the ISP-provided router for our gigabit fibre to the Asus RT-AC86U. With the defaul...
Hi,Has anyone tried using a reverse proxy (Nginx) to access R7800 management console instead of opening the remote access port to the internet?I'm int...

Don't Miss These

  • 1
  • 2
  • 3