Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

Marvell today announced an 802.11n 3x3 WLAN solution with three spatial streams, capable of operating at 450 Mbps.

The Marvell TopDog 11n-450 uses "Marvell-engineered enhancements" to the draft 11n specification, such as Special Time Block Coding (STBC), that helps maintain higher throughput over longer distances.

The new device delivers 3x3 capabilities with three transmitters and three receivers, and is built on a 90-nanometer (nm) CMOS process.

The product is currently sampling.and is expected to begin shipping "in volume" in 2Q08.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

HelloI have RT-AC87U Router with latest Merlin firmware and my network have access to address starts from 192.168.10.1 to 192.168.11.254. My IP of rou...
Stubby is an application that acts as a local DNS Privacy stub resolver using DNS-over-TLS. Stubby encrypts DNS queries sent from a client machine to ...
As you already noticed entware-ng (http://pkg.entware.net/binaries/mipsel) doesn't get updated anymore.The repo on github is archived (read-only) and ...
Hi,I have RT-AC86U on latest merlin FW 384.7. At the same time i have 2 x 1Gpbs connection from 2 diff ISPs.I have configured load-balancing ratio of ...
Any ideas on how to get overclocking working on RT-AC68U running 384.7? I am using JFFS scripts to set clkfreq to 1200,666. This is working (verified ...

Don't Miss These

  • 1
  • 2
  • 3