Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Introduction

Updated 7/3/2008 - Corrected radio module information.
Updated 10/31/2007 - Corrected processor and switch part numbers. Removed statement about IEEE Draft 2.0 violation.

Linksys WRT600N

At a Glance
Product - Linksys Dual Band Wireless-N Gigabit Router with Storage Link(WRT600N)
- Linksys Dual Band Wireless-N Notebook Adapter (WPC600N)
Summary Broadcom-based dual-band Wi-Fi Certified 802.11n Draft 2.0 router with 10/100/1000 WAN and LAN and NAS support
Pros • Two radios for simultaneous dual-band operation
• Four-level priority-based QoS and WMM support
• NAS features with external USB drive
Cons • No WPS
• Relatively expensive

Linksys almost announced the WRT600N back in January at CES. They decided not to go forward with it at the last minute, but not before exposing it enough to make its existence widely known. D-Link took a similar tack, but instead actually announced its dual-band DIR-855, which is still marked as "Coming Soon" on its website.

Well, last week Linksys finally officially unleashed its dual-band Draft 11n offering and was kind enough to ensure that we got one of the first batch. This makes the 600N the second two-radio simultaneous dual-band draft 11n router available (the currently unavailable Buffalo WZR-AG300NH is the other), which has many potential wireless LAN upgraders chompin' at the bit to spend their money.

The 600N has the same package style as its single-band sibling, the WRT350N, but opts for an all-black look to convey an impression of power and elegance. Figures 1 and 2 detail the front and back panels, but omit mention of the top-of-case "Reserved" button.

WRT600N Front Panel

Figure 1: WRT600N Front Panel

If previous designs are any indication, this will be used to kick off a Wi-Fi Protected Setup (WPS) session, once Linksys gets around to adding that function in a future firmware update. For now, however, you'll need to use Linksys' EasyLink Advisor application or set up wireless security manually. If you want more about EasyLink Advisor, as well as commentary on other features, see Glenn Fleishman's WRT600N review.

WRT600N Rear Panel

Figure 2: WRT600N Rear Panel

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

So, this is a thing that has bugged me for a long time. When I am on the Network Map page, I see the clients connected with 31 connected clients. Then...
I ran into this issue early today and figure to upgrade the firmware to 384.8_2 since it is available (hoping that fixes the issue)...But I still can ...
Hi..This is related to Asus RT-AC88U firmware version 384.8_2 but I always get "Cannot assign requested address" and "Failed to get IP for interface e...
I have one Asus 68u repeater mode in the basement connected wirelessly to a bell parent modem/router on main floor. Only wifi is working on Asus route...
While waiting for Amazon to deliver the new GT-AX11000, I have opened this thread to discuss this new flagship router.I am going to pair it with my ex...

Don't Miss These

  • 1
  • 2
  • 3