Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews


The WNDR4000's feature set is pretty much the same as the WNDR3700v2's. You can check the WNDR3700v2 review for a summary of the v1 to v2 changes. Here's a summary of the WNDR4000's routing features:

  • DHCP, Static, PPPoE, PPTP, L2TP WAN types
  • IPv6 support (6 to 4 tunnel, Pass Through, Fixed, DHCP, PPPoE, auto detect WAN types)
  • Built-in dynamic DNS client for DynDNS
  • DHCP server with address reservation
  • Static and dynamic (RIP 1, 2) routing
  • UPnP automatic port mapping (NAT Traversal)
  • Single and port range forwarding with separate internal and external port settings
  • Triggered port forwarding
  • Firewall controls: Port scan DoS protection disable; IGMP Proxy; MTU size; NAT filtering; SIP ALG
  • Remote management enable with IP range restriction and port setting
  • Schedulable keyword site blocking w/ trusted IP bypass
  • Schedulable service blocking by IP
  • Uplink (LAN to WAN) only QoS with High, Medium, Normal or Low Priority by service
  • WMM (Wireless MultiMedia) (enabled by default)
  • SMB/CIFS file sharing, HTTP, FTP access and UPnP AV media serving from attached FAT, NTFS formatted drive
  • Emailed logs and alerts
  • Onscreen log w/ enables for allowed/blocked site access, admin access, port forward / triggers, DoS and Port scans, wireless access, router operation
  • Traffic meter with monthly upload/ download / both limit with warn and disconnect options

Missing routing features include:

  • IPsec, PPTP and L2TP VPN passthrough controls
  • HTTPS admin access

Note that the missing VPN passthrough controls don't mean that VPN passthrough isn't supported. It is. But you just can't enable / disable the feature as you can on other routers.

Here is a summary of wireless features:

  • 2.4 and 5 GHz radios with separate controls
  • SSID broadcast, channel, mode control
  • WPA-PSK, WPA2-PSK and mixed security modes
  • Client-to-client isolation control
  • Guest networks on both bands with separate security, client-to-client isolation control and client-to-LAN control
  • Wireless radio on/off (software and hardware switch and by schedule)
  • Fragmentation, CTS/RTS, Preamble mode controls
  • Client MAC address access control
  • Wi-Fi Protected Setup (WPS) support with keep setting control and PIN disable

And missing wireless features:

  • WEP security
  • WPA/WPA2 Enterprise (RADIUS)
  • Transmit power control
  • Connect rate control

Elimination of WEP support seems to be a trend. And at some point we can expect 802.11b support to disappear or at least not be guaranteed.

Channel selection defaulted to Auto for both 2.4 GHz and Channel 153 for 5 GHz. The Mode selector was set to Up to 145 Mbps (20 MHz mode) for 2.4 GHz and Up to 450 Mbps for 5 GHz (40 MHz mode). There are no separate a/b/g/n mode controls. But you can limit operation to 802.11b/g or 802.11a by setting the 2.4 or 5 GHz radio Modes to Up to 54 Mbps. To change the 2.4 GHz radio to 40 MHz mode, choose Up to 54 Mbps and to change the 5 GHz radio to 20 MHz bandwidth choose Up to .217 Mbps.

Channel selection is 1-11 for 2.4 GHz (for US operation) and 36, 40, 44, 48, 149, 153, 157, 161 for 5 GHz.

The Gallery below contains screenshots of the wireless setting pages and a few other key screens.

More Wireless

Featured Sponsors

Top Ranked Routers




Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi Guys,Thank you Merlin for all your hard work and excellent firmware.A little background:I'm coming from N66U (which run shibby's tomato, I guess yo...
We have a very small, basic network at work -- 3 computers, a superfluous switch & a router -- diagram attached.Our cable provider had a 2-hour outage...
Well, looking back it seems I've had my RT-AC87U for a little under 18 months. Clearly I'm doing something wrong, because I've had absolutely zero iss...
I'm getting an Asus RT-AC68P and am looking forward to installing rmerlin on the device. I have quite a few network devices, including at least 15 sec...
Hello,I recently decided to upgrade from 380.58_0 to 380.61_1The upgrade seemed to take without issue however when I go to the LAN --> DHCP Server pag...

Don't Miss These

  • 1
  • 2
  • 3