Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Wireless Performance

The WAP561 is Wi-Fi Certified. Radio 1 defaults to 802.11b/g/n (2.4 GHz) mode, 20 MHz bandwidth and auto channel assignment, while Radio 2 defaults to 802.11a/n (5 GHz), 20/40 MHz bandwidth and auto channel assignment. Radio 2 can also be set to 802.11a and 802.11n 5 GHz modes. But Radio 1's mode can be set to either band with choices of 802.11a, 802.11b/g, 802.11a/n, 5 GHz 802.11n or 2.4 GHz 802.11n.

Both radios are disabled by default, but set to the default ciscosb SSID. Getting initially setup is a bit confusing since all the settings you need are scattered among multiple screens. so I recommend using the Setup Wizard to ensure that SSIDs, security and frequency bands get configured the way you desire.

When you do enable the radios, WiFi Protected Setup (WPS) is enabled by default. Given the business nature of the product, I didn't test it. I also didn't run 40 MHz Coexistence and Fat channel intolerant tests.

I used Channel 6, 20 MHz bandwidth mode for 2.4 GHz tests and Channel 153, 20/40 MHz bandwidth mode for 5 GHz tests. WPA2/AES secured connections were used in both cases. The AP was placed horizontally in the test chamber on a 3" plastic stand. Given the 9" size of the AP, its closest surface was around 7.5" from the test chamber antennas vs. the usual 8".

Because the WAP561 is not a router, you'll find it in the Wireless Charts, not the Router Charts. It's the only N900 class AP in the charts, there isn't anything to compare it with. The good news is that it was tested with the new chamber-based test process, so we have a good view of its performance over its entire signal range.

Fortunately, I also tested Ubiquiti's UAP-AC AC1750 class AP using the new process. And since the 2.4 GHz side of an AC1750 AP is N450 class (3x3), I can compare these two products in that band below.

The 2.4 GHz downlink plot shows the Cisco starting out with higher throughput, but starting to fall off after 15 dB of attenuation. The Ubiquiti starts out with lower throughput, but doesn't start its decline until after 30 dB. This and the fact that the WAP561 disconnected at 57 dB indicates better 2.4 GHz downlink range for the Ubiquiti.

Wireless performance comparison - 2.4 GHz, 20 MHz mode, downlink

Wireless performance comparison - 2.4 GHz, 20 MHz mode, downlink

The two products are more evenly matched for 2.4 GHz uplink, but it looks like the Ubiquiti still has a slight range edge.

Wireless performance comparison - 2.4 GHz, 20 MHz mode, uplink

Wireless performance comparison - 2.4 GHz, 20 MHz mode, uplink

For 5 GHz, I chose the ASUS RT-N66U to compare. It's a router, not an AP, but it is an N900 class product, so the comparison is fair. Since the Charts don't let me mix APs and routers, I had to cobble together the plots below.

The 5 GHz downlink plot shows the ASUS with superior range over the Cisco since its throughput holds steady out to 30 dB of attenuation.

Wireless performance comparison - 5 GHz, 40 MHz mode, downlink

Wireless performance comparison - 5 GHz, 40 MHz mode, downlink

The ASUS' superior range holds true also for 5 GHz uplink.

Wireless performance comparison - 5 GHz, 40 MHz mode, uplink

Wireless performance comparison - 5 GHz, 40 MHz mode, uplink

Closing Thoughts

The WAP561 has a good feature set that should put a smile on anyone charged with managing a small multi-AP wireless LAN. No controller to set up, manage or pay extra for, automatic channel management, captive portal and rogue AP detection are among its pluses.

But I had hoped for more sophisticated load management controls and some idea of how fast handoff would work.And it doesn't appear that Cisco's "Smart Signal" antenna system provided a performance edge over a consumer router priced much lower, albeit a best-in-class one. And finally, a little graphics thrown into the administrative views would have been nice to help better visualize larger multi-AP networks.

In the end, the main thing going against the WAP561 is that it's an N900 AP, and a fairly pricey one, in a world that's fast moving to 802.11ac. But if you're looking for business grade AP features with controller-less multiple AP management, the WAP561 could be worth checking out.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!


Over In The Forums

Feel free to ignore. Want a place to store my core AX88u settings for future reference.WAN:Code: user: broadbanduser@btbroadband.compass: bthomehub@b...
Good day,I'm an occassional lurker in this forum and got lots of good advise over the years. Thank you.Can somebody possibly help with the following: ...
i was playing around with reading and writing the dhcp list and i succeeded.i now however want to delete the created dhcplist.txt file but i get the e...
Hi,I would like to be able to set the mount options for NFS.According to this:
Continuation of the first thread which covered beta 1 through 3.Jan 25th: Beta 5 is now available. Changes since Beta 4:Code: 3790c8fe9a Updated docu...

Don't Miss These

  • 1
  • 2
  • 3